Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Mount Plymouth
Electric gate repair in Mount Plymouth usually means one of three things: a motor that stopped responding, a gate that no longer closes square, or a keypad and sensor system that’s gone dark. Most jobs we handle here run between $180 and $340 for common opener and sensor failures, and we can usually get a technician to your driveway within 1 to 2 business days. If you’re off CR 437, Saddler Road, or anywhere in the 32776 zip code, call (855) 927-1091 and we’ll walk through what you’re seeing before we ever roll a truck.
Regent Gate Repair works exclusively on gates. That’s the whole business. So when a Mount Plymouth homeowner calls us about a dead LiftMaster arm or a Mighty Mule that won’t hold a charge, the person who answers actually knows the system you’re describing.
Why Regent Gate Repair Is Mount Plymouth’s Preferred Electric Gate Repair Company
Mount Plymouth properties are not like subdivision lots in nearby Mount Dora or Eustis. Most sit on an acre or more. The driveways are long, often gravel or unpaved, and the gates at the end of them are usually heavy tube or ranch-style swing gates, not the lightweight aluminum panels you see in planned communities. That changes how a repair has to be done. A post that’s shifted half an inch in sandy soil can throw a 400-pound gate out of alignment and burn out a motor in a matter of weeks.
We understand that dynamic because we see it constantly. Our techs know that a gate in Mount Plymouth that won’t open isn’t always a motor problem. More often it’s a footing problem, a wiring problem, or a power supply that was never sized correctly for the gate it’s running. We diagnose the whole system, from the control board to the hinge, before quoting anything.
Noel Carrington leads our repair team, and he’s built the company around a single idea: gate work deserves a specialist. Not a handyman who also patches drywall. Not a garage door company that fits gates in between opener installs. Just gates. Electric gate repair, mechanical gate repair, and full replacement when the system is beyond saving.
Call (855) 927-1091 for a free estimate. We quote the price before any work begins, and that’s the price you pay.
Styles & brands we work with
Electric Gate Motor in Mount Plymouth
Electric gate motor repair in Mount Plymouth typically costs $220 – $380 depending on whether we’re replacing a swing arm, a slide operator, or a control board, and most motor jobs are completed in one visit. The motors on rural Lake County properties work harder than their suburban counterparts. Long driveways mean longer wire runs. Pasture gates get cycled multiple times a day. And the sandy soil we mentioned means posts and hinges shift, which forces the motor to strain against a gate that no longer swings true.
Swing Arm and Slide Motor Replacement
When a swing arm motor fails, we check the post and hinge alignment before installing the new unit. Skipping that step in Mount Plymouth is the fastest way to kill a brand-new motor. We set the post in concrete if it’s moved, correct the sag, then mount the operator.
Control Board and Capacitor Diagnostics
A dead keypad doesn’t always mean a dead board, but when the board does fail, we can usually source a replacement fast because we stock parts for the brands Mount Plymouth homes actually use: LiftMaster, Mighty Mule, Elite, and DoorKing. No week-long waits for a part that leaves your property open.
Gate Access Control in Mount Plymouth
Gate access control repair in Mount Plymouth runs $150 – $320 for keypad, remote receiver, and safety sensor work, and it’s one of the most common calls we get from homeowners who bought a place with an existing automated gate. Many of these systems were installed years ago, sometimes by the previous owner, and the wiring was never done to handle Lake County humidity or the lightning that comes with summer thunderstorms.
Keypad and Remote Programming
If your keypad works intermittently or only one remote opens the gate, the issue is usually a receiver board or a corroded connection, not the remote itself. We bench-test the receiver, replace boards when needed, and reprogram every remote and keypad on the property so they all work together.
Safety Sensor and Loop Detector Repair
Photo-eye sensors cloud over in Mount Plymouth’s humidity, and that alone can stop a gate from closing. Loop detectors buried in sandy soil can also fail silently. We test both, clean or replace sensors, and verify the closing force settings so the gate never becomes a hazard to vehicles, animals, or people.
Trusted Brands We Service in Mount Plymouth
We work on Mighty Mule, LiftMaster, Elite, and DoorKing systems regularly in Mount Plymouth, along with five other major gate operator brands. Because gate repair is our only trade, we carry common boards and remotes for these brands on our trucks. That means less waiting for a part to ship and more jobs finished in a single trip. If you’ve got a Ghost Controls opener on a pasture gate or a commercial-grade DoorKing on a small private road, our Electric Gate Repair team has seen it and worked on it before.
Common Electric Gate Repair Problems We See in Mount Plymouth Homes
- Post settling in sandy soil: Mount Plymouth’s well-drained ground shifts after heavy rain, which tilts gate posts and throws swing gates out of alignment. The motor then strains against the sag and fails. We re-set posts in concrete before replacing any operator.
- Builder-grade openers on manual gates: Many newer developments around Mount Plymouth installed gates without proper power and conduit runs. Owners later added automation, but the operator was never matched to the gate’s weight or the wiring’s capacity. These systems fail early and repeatedly until the underlying setup is corrected.
- UV and humidity damage to solar systems: Rural properties with solar panels and battery backups deal with intense Florida sun and year-round moisture. Panels crack, connections corrode, and batteries stop holding a charge. We replace panels, re-clean terminals, and upgrade batteries when needed.
- Lightning strike damage from summer storms: Lake County thunderstorms send surges through gate control boards and safety sensors. If your gate stopped working right after a storm, the board probably took a hit. We diagnose and replace surge-damaged components.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Mount Plymouth, FL
Most electric gate repairs in Mount Plymouth land between $150 and $380. A keypad or remote programming job starts around $150. Sensor replacement and alignment usually runs $180 – $260. Motor or control board replacement is typically $220 – $380 depending on the brand and whether we’re also re-setting a shifted post, which adds $80 – $150 when concrete work is required. Notably, no one should pay for hidden line items. We walk you through the quote before work starts, and the number we give is the number on the invoice. Call (855) 927-1091 to schedule a free estimate.
We Also Serve Cities Near Mount Plymouth
Our technicians cover Mount Plymouth and the surrounding Lake County communities. If you’re in Zellwood, Tangerine, Mount Dora, or Eustis, we can often schedule you the same week. The same gate-only focus and brand-specific diagnostics apply no matter which side of the county line you’re on.
Serving Mount Plymouth, FL — Our Local Coverage Area
We’re based in the Mount Plymouth area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Mount Plymouth
Mount Plymouth’s sandy, well-drained soil absorbs heavy rain quickly, which lets gate posts shift and settle. That movement throws swing gates out of alignment, and the motor burns out trying to force a gate that no longer closes square. Lightning from summer thunderstorms also damages control boards and sensors. A proper repair means checking the post footing and surge damage, not just swapping a motor. Call (855) 927-1091 if your gate stopped working after a storm.
Yes. Many Mount Plymouth properties have manual gates that were installed without power or conduit. We add the operator, run the proper low-voltage or line-voltage wiring, install safety edges and photo-eye sensors, and program remotes and keypads. We also size the motor to the gate’s actual weight and swing, which matters more on heavy ranch-style and tube gates than on lightweight aluminum panels. Call (855) 927-1091 for a quote on automating your existing gate.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers everything from residential Mighty Mule and Ghost Controls systems on hobby farms to commercial-grade FAAC and DoorKing operators on private roads and small commercial lots. Call (855) 927-1091 with your brand and symptom, and we’ll tell you if we can fix it same-visit.
We install and repair keypad entry systems, telephone entry units, loop detectors, and safety sensors for properties with long driveways, secondary pasture gates, or small private roads. On larger properties, we often recommend a wired keypad at the road and a separate solar-powered operator on interior gates, so the whole property can be secured without trenching power to every corner. Call (855) 927-1091 for a site evaluation.
It’s a strong possibility. Mount Plymouth’s sandy ground settles after rain, so gate posts drift out of plumb. The motor then fights the gate’s weight on every cycle, overheating and eventually burning out. If we replace a motor without addressing the post, you’ll be calling us again in a few months. We check the footing on every motor job. Call (855) 927-1091 and we’ll inspect the post before quoting any motor work.
Call Regent Gate Repair for Electric Gate Repair in Mount Plymouth
If your electric gate is dead, sagging, buzzing, or stuck halfway open, call (855) 927-1091. We’ll diagnose the problem over the phone when possible, give you a straight answer, and schedule a service visit that fits your schedule. Free estimates, upfront pricing, and a technician who works on gates all day, every day. That’s the whole idea.
Written by Noel Carrington, Owner at Regent Gate Repair, serving Mount Plymouth and Lake County. A gate-only specialist company focused on electric gate repair, gate installation, and full-system replacement.