Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Flagler Beach, FL
Gate installation in Flagler Beach runs from about $1,800 for a basic single swing gate to $14,000+ for a custom automated slide gate with full access control. Most of our Flagler Beach work lands in the $3,200 to $7,500 range, depending on gate size, automation, and how much marine-grade hardware the salt air demands. We’re Regent Gate Repair, a gate-only company serving Flagler Beach since 2013, and we handle everything from the first post hole to the final limit-switch adjustment. Call (855) 927-1091 for a free onsite estimate.
Why Flagler Beach Homes Are Different
Flagler Beach is a narrow barrier-island town where nearly every property sits within a few blocks of the Atlantic or the Intracoastal. That means gate hardware lives in salt-laden onshore air year-round. Operators, hinges, and fasteners on driveway, pool, and dune-access gates fail from corrosion far faster here than even a few miles inland in Palm Coast or Ormond Beach. Where a gate in Bunnell might last 15 years before the hinges seize, the same hinge on the ocean side of A1A can be rust-welded in half that time.
Our technicians learn to inspect Flagler Beach gates starting with the seaward side. Gates facing the ocean corrode on their windward faces and hardware while the leeward side looks fine, so a quick walk-past inspection misses the actual failure point. We check seaward hinges, operator housings, and mounting fasteners first, then spec stainless or marine-grade replacements, because standard galvanized parts are back to seizing within a season. The housing stock here runs from 1950s block and stucco cottages to newer elevated construction built to post-storm flood standards. The older homes often carry steel swing gates that have been repainted over rust for decades, and the elevated homes frequently have long driveways with automated operators that take a beating from storm-driven sand and wind.
Styles & brands we work with
Our Main Flagler Beach Services
Two services account for most of the calls we get across the 32136 ZIP code. Both require a specialist who understands salt-air corrosion and barrier-island conditions.
Gate Repair in Flagler Beach
Most Flagler Beach repair calls are less about mechanism wear and more about hardware that has seized, rust-welded, or bound up from sand and salt. We cut free rusted hinges, replace broken operators, straighten storm-shifted posts, and rebuild gates that still have good bones but bad hardware. If your gate drags, screams, or won’t latch, the problem is rarely mysterious. It’s usually corrosion on the seaward side that a general handyman would misdiagnose. Gate Repair in Flagler Beach covers everything from a single hinge to a full gate rebuild.
Electric Gate Repair in Flagler Beach
Electric gate repair is where the salt air does its most expensive work. Control boards corrode, loop detectors fail, and safety sensors get coated in salt film and stop reading. We work on residential and commercial operators across nine brands, which means we can usually diagnose a dead FAAC board or a Mighty Mule arm that won’t respond before we even open the housing, because we’ve seen the same failure on the same brand dozens of times. Electric Gate Repair in Flagler Beach covers the full electrical side, from boards to sensors to wiring.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Flagler Beach
A new gate installation in Flagler Beach has to be built for salt air, storm wind, and sandy soil, not just for curb appeal. We install automatic and manual gates with marine-grade fasteners and stainless hardware as standard on the ocean side of A1A, because anything less is a callback in 18 months. Same company for repair or full replacement: if your existing gate is beyond saving, we can pull it out and set a new one without you having to find a second contractor. Our Gate Installation service covers the full build, from digging posts to programming remotes.
Automatic Gate Installation
Signs you need it
You’re still getting out of the car to open a driveway gate by hand, or a previous automation kit from a big-box store has quit and you want a permanent fix.
What it costs in Flagler Beach
Automatic gate installation in Flagler Beach typically runs $4,000 to $12,500 installed, with the operator, arms, safety edges, and programming included.
How we do it
We set or reinforce the posts, mount the operator to spec for its swing or slide type, run the power and sensor wiring, install photo eyes and safety edges, then program remotes and set limits on site.
Driveway Gate Installation
Signs you need it
Your old driveway gate is rusted through at the hinge boxes, the posts are leaning from storm wind, or you want a wider opening that current posts can’t support.
What it costs in Flagler Beach
A new driveway gate in Flagler Beach runs $1,800 to $8,000 depending on material and width; steel costs less up front, aluminum holds up longer against the salt.
How we do it
We pull the old gate and posts, set new posts in concrete with stainless hardware, hang the new gate, and adjust the hinges so it swings true on a slight coastal grade.
What Gate Installation Costs in Flagler Beach
| Item | Typical range in Flagler Beach |
|---|---|
| Basic manual swing gate (single, steel) | $1,800 – $3,200 |
| Automatic single swing gate with operator | $4,000 – $7,500 |
| Sliding automatic gate with access control | $7,000 – $14,000+ |
How long does gate installation take in Flagler Beach?
Most single-gate installations take one full day for the gate and one follow-up visit for automation testing. Custom slide gates and access-control systems can take two to three weeks from order to final programming.
Do you handle permits for Flagler Beach gate installation?
We handle the electrical and building permit paperwork when the city or county requires it. Most residential driveway gate replacements don’t need a permit, but new automated systems with power runs often do. Call (855) 927-1091 and we’ll check for your specific property.
Brands We Service in Flagler Beach
We carry parts and know the failure patterns for LiftMaster, FAAC, Elite, and Mighty Mule, plus five other major gate-operator brands. A dead FAAC board on a Friday afternoon gets a same-week repair because we stock common boards and sensors locally. See our brands for the full list and what we stock.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Flagler Beach, FL
| Service | Typical range in Flagler Beach |
|---|---|
| Gate hinge replacement (pair, steel) | $180 – $450 |
| Gate post reset or straighten | $300 – $800 |
| Basic manual swing gate (new install) | $1,800 – $3,200 |
| Automatic single swing gate with operator | $4,000 – $7,500 |
| Sliding automatic gate with access control | $7,000 – $14,000+ |
| Electric gate repair (labor, most jobs) | $350 – $650 per day |
| Operator replacement (new motor and mount) | $2,300 – $5,600 |
| Swing gate rebuild with new structural members | $2,500 – $6,000 |
| Control board repair or replacement | $450 – $1,500 |
| Safety sensor and photo eye replacement | $300 – $800 per pair |
Salt-air corrosion and wind damage are the two big price drivers in Flagler Beach. Gates that look repairable often need more hardware replaced than the same gate would inland, because half the fasteners snap on removal. Whatever the number, you’ll get your full price in writing before any work starts, and we don’t change it unless we find something structural you need to see for yourself first.
Neighborhoods We Serve in Flagler Beach
We work the full 32136 ZIP code, from the A1A corridor and the ocean side of the barrier island to the Intracoastal-side streets and the neighborhoods off Moody Boulevard. Most of our Flagler Beach calls get scheduled within two to three business days; emergency gate-down calls on the A1A corridor get priority because a gate stuck open on a dune-access lot is both a security and a liability issue.
- Ocean side of A1A (dune-front and beach-access properties)
- Intracoastal side (canal and boathouse lots)
- Moody Boulevard corridor
- Beverly Beach area (north end of 32136)
- Bulow Woods and adjacent elevated-home neighborhoods
Service Area – Cities Near Flagler Beach
Regent Gate Repair serves Flagler Beach and the surrounding coastal and inland communities. We regularly work in Palm Coast, FL, along the beachside communities of Ormond-by-the-Sea, FL, and inland through Bunnell, FL. We also cover Ormond Beach, FL for larger commercial gate and access-control jobs. If you’re just outside these areas, call us anyway, we’ll tell you straight if we can get to you.
Serving Flagler Beach, FL — Our Local Coverage Area
We’re based in the Flagler Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Flagler Beach
Yes. If your gate is stuck open and you can’t secure the property, call (855) 927-1091 and we’ll prioritize it. Emergency response is for true security issues, a gate stuck open on an ocean-side lot or a commercial access point, not for routine maintenance. We’ll be straight with you about what constitutes an emergency.
It depends on your neighborhood. Some Flagler Beach HOAs and condo associations have architectural review rules for new gates, especially visible driveway and dune-access gates. We can’t file the HOA application for you, but we can provide the specs, materials list, and installer details your board will ask for.
Standard gate installations usually start within one to two weeks. Custom slide gates and automated systems with access control can take longer because the components are ordered to size. Call (855) 927-1091 for a free estimate and we’ll give you a real start date, not a vague window.
If your gate is rusted shut, dead at the board, or just done, call Regent Gate Repair at (855) 927-1091. One call covers the diagnosis, the repair, or the full replacement.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Flagler Beach Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Anika Patel"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Tim Brooks"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Jeff Ackerman