Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Orlando
Electric gate repair in Orlando usually costs $185 – $420 for common failures like a dead control board, a burned-out opener motor, or a keypad that stopped talking to the operator. Most repairs across Orlando’s neighborhoods can be scheduled same-day or next-day, and we quote the full price, parts and labor, before any work begins. If your gate won’t open in Lake Nona, won’t close in Winter Park, or is stuck mid-travel near Colonialtown, call (855) 927-1091. We work on gates all day, every day. That’s the whole job.
Why Regent Gate Repair Is Orlando’s Preferred Electric Gate Repair Company
Regent Gate Repair is a gate-only shop. We don’t hang garage doors, we don’t build fences, and we don’t take general handyman calls. Every technician who arrives at an Orlando home or commercial property is there for one reason: the gate. That focus matters when a LiftMaster operator board is dead after a storm and you need someone who can diagnose it by the failure pattern, not by trial and error.
We work on nine gate-operator brands across the full spectrum: Mighty Mule and Ghost Controls at the residential entry level, LiftMaster, Linear, and Elite in the mid-range, and FAAC, BFT, DoorKing, and Viking on the commercial side. Fewer trucks in Central Florida can source parts and diagnose across that range on a single visit. Orlando property managers running access-control systems on DoorKing or FAAC equipment don’t have time for a technician who has to research the operator before touching it.
We also handle both electric/automated systems and traditional mechanical gate hardware. A sagging wrought-iron gate in Delaney Park that drags on its hinges is a mechanical failure. A keypad in Baldwin Park that stopped triggering the opener is an electronic one. Most companies do one or the other. We do both, because a gate system is both.
Led by Noel Carrington, our team understands Orlando’s specific repair profile: solid infill gates that catch hurricane-season wind like sails, post footings that shift in sandy saturated soil, and control boards that take direct hits from summer lightning. That local knowledge shapes how we diagnose, what we stock, and how fast we can get you back in service.
Styles & brands we work with
Commercial Gate Operator in Orlando
Commercial gate operator repair in Orlando runs from $320 for a simple limit-switch adjustment or loop-detector replacement up to $1,800 – $2,600 for a full operator replacement on a slide or cantilever gate using a FAAC, BFT, DoorKing, or Viking unit. We handle HOAs, apartment complexes, resort properties along the attractions corridor, and commercial lots across the metro, and we quote every job before work starts.
Orlando’s commercial gate equipment works harder than most markets. Gated communities in Lake Nona and along Narcoossee Road run entry gates continuously, sometimes hundreds of cycles a day. Vacation-rental communities near Disney and Universal see even more traffic, with gates cycling for delivery vehicles, ride-share pickups, and guests who don’t know the access code. That cycle count kills operators early, and the repair pattern is consistent: worn drive belts on FAAC slide operators, burned contactors on Viking swing units, and loop detectors that drift out of tune from heat and humidity.
Access-Control Boards and Loop Detectors
When a commercial gate stops responding to keypads, phone-entry systems, or vehicle loops, the problem is usually at the control-board level. We replace boards on FAAC, BFT, DoorKing, and Viking systems and re-tune loop detectors on site. A failed loop detector at a busy Orlando HOA entrance means backups at the call box, and that’s not a job where you want a generalist figuring it out live.
Slide and Cantilever Gate Hardware
Commercial slide gates in Orlando face a specific problem: sandy soil that shifts under heavy summer rain, causing track misalignment and rack-and-pinion binding. We re-level track, adjust rack engagement, and replace worn wheels or rollers. For HOAs and property managers, we can quote a full operator and hardware package if the existing unit is beyond repair, so you’re not juggling two contractors.
Gate Opener Repair in Orlando
Gate opener repair in Orlando typically costs $185 – $480, depending on whether the issue is a failed capacitor, a stripped gear, a burned motor, or a control board that took a lightning surge. We repair openers on Mighty Mule, Ghost Controls, LiftMaster, Linear, and Elite systems in residential swing and slide gates across Orlando, and we stock common replacement boards and remotes for faster turnaround.
Orlando’s climate shortens opener lifespan. High humidity corrodes internal contacts. Summer storms send voltage spikes into circuits. And because so many Orlando homes are in gated HOA communities or short-term rental properties, the openers cycle more often than the national average. An opener that might last 12 years in a drier, cooler market often fails at 7 or 8 here.
Residential Swing Gate Openers
When a swing gate opener fails in a neighborhood like Colonialtown or Delaney Park, the culprit is often a seized hinge that overloaded the motor, or a control board that died from a surge. We replace the failed part and check the mechanical side too. An opener motor that burns out because a hinge is rusted through will just burn out again if you don’t fix the hinge.
Slide Gate Openers and Rack Systems
Slide gate openers in Orlando face a different problem: the track and footing shift during wet-dry cycles in the sandy soil, and the gate drags. That extra resistance kills motors and strips gears. We align the track, re-set the post if needed, and replace the opener or drive components. The fix has to address the whole system, not just the part that gave out.
Trusted Brands We Service in Orlando
We stock replacement parts and service all the major operator brands Orlando homeowners and property managers actually run. That includes Mighty Mule for residential swing gates, LiftMaster for both residential and light-commercial slide and swing operators, FAAC and BFT for hydraulic and electromechanical commercial systems, plus Linear, Elite, Ghost Controls, DoorKing, and Viking. Nine brands, one call. When we arrive at an Orlando job, we’re not guessing which manufacturer built your operator. We already know the failure patterns, the common weak points, and what parts the job likely needs. That’s why our diagnostic visits move faster than a generalist’s, and why we can often repair the same day.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Orlando Homes
- Lightning-fried control boards and keypads. Orlando’s near-daily summer thunderstorms send surges through overhead wiring into opener electronics. After a storm, we get a wave of calls for dead LiftMaster boards and unresponsive keypads, especially in older neighborhoods with above-ground utilities. We replace the board and recommend a surge protector at the operator’s power source for future storms.
- Post settlement and gate sag after heavy rain. Central Florida’s sandy soil saturates during downpours, and hinge posts shift. A swing gate that dragged on the ground after a wet week in Conway or Belle Isle has a footing problem, not just a hinge problem. We reset posts or re-hang the gate to bring it back to plumb.
- Wind-bent hardware on solid infill gates. Solid aluminum, wood, and vinyl gates act like sails in hurricane-season gusts. The wind load overpowers openers, bends brackets, and strips gears. We reinforce hardware and adjust force settings so the operator isn’t fighting the gate every cycle.
- Rusted-through hinges hidden under decades of paint. Older Orlando homes in districts like Delaney Park often have original steel gate hardware that’s been repainted for 40 or 50 years. The paint hides rust until the hinge fails and the gate drops. We replace the hinge and treat the surrounding hardware so you’re not chasing the same failure season after season.
After a July lightning storm one summer, we responded to a Lake Nona vacation rental where the LiftMaster operator board was dead and the keypad was unresponsive. The gate was a solid aluminum slide gate, and its post footing had shifted in saturated soil, causing the rack and pinion to bind. We replaced the control board, re-leveled the footing, and adjusted the rack and pinion. The gate was back in service the same day.
Pricing for Electric Gate Repair in Orlando, FL
Here are the dollar ranges we quote for common electric gate repair jobs in Orlando, including the 32833, 32834, 32835, and 32836 zip codes:
- Keypad or remote programming: $95 – $185
- Safety sensor replacement: $140 – $260
- Control board replacement: $285 – $520
- Opener motor replacement: $320 – $680
- Hinge or post realignment: $180 – $420
- Full commercial operator replacement: $1,800 – $2,600
The biggest cost driver is whether the failure is electronic or structural. A board swap is quick. A post that shifted in saturated soil takes longer, because we have to re-set and re-level before the gate will travel cleanly. We quote the complete price before any work starts, and estimates are free. Call (855) 927-1091 for an exact number on your gate.
We Also Serve Cities Near Orlando
Beyond Orlando proper, our Electric Gate Repair team covers Conway, Azalea Park, Belle Isle, and Edgewood, plus the rest of the metro. If you’re in any of these communities and your gate won’t open or close, call (855) 927-1091. We quote the repair before we start, and we’re the Electric Gate Repair in Orlando team that handles both the electronics and the steel.
Serving Orlando, FL — Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Orlando
Check whether the keypad or remote still beeps or clicks when you use it. If there’s no sound and the gate is dead, a lightning surge likely damaged the control board or the keypad input. Don’t try to force the gate open by hand if it’s an automated slide or swing system with a still-engaged operator; that can bend the linkage. Call (855) 927-1091 and we’ll diagnose it on site, usually the same day.
The manual release is a lever or a keyed mechanism located on the gate operator itself, often at the base of the unit or behind a small access panel. If the gate is a swing gate, push the lever into the disengaged position and move the gate by hand. If the gate is a slide gate, release the operator and push the gate along its track. Never stand between a moving gate and a fixed object while releasing it. After power returns, reset the lever and let the operator re-engage before using the automatic controls.
Orlando’s sandy soil expands and shifts during heavy downpours, especially in the summer. A gate hinge post that was stable in March can be a half-inch out of plumb by August. The result is a swing gate that drags or a slide gate that binds on its track. We fix the footing and re-hang the gate rather than just tightening hardware, because the soil movement is the root cause in most of our Orlando call-outs.
Yes. Solid infill gates catch wind like a sail, and during Orlando’s hurricane-season gusts, the force on the gate can be several times the weight of the gate itself. That load transfers directly into the operator’s gear train, gears, and brackets. Over time, or in a single bad gust, it strips gears, bends arms, and burns motors. The fix is to either add wind relief openings in the gate leaf or install an operator rated for the gate’s full wind-load surface, not just its weight.
Florida automatic gates must include a reversing mechanism that stops and reverses the gate when it hits an obstruction, plus photo-eye or safety-edge sensors that detect people or vehicles in the gate’s path. The current UL 325 standard applies, and any gate we repair in Orlando gets a safety system check as part of the job. A gate that reverses into a vehicle or a person is a liability, not just a nuisance. If your safety sensors are disabled or bypassed, we’ll tell you and quote the repair.
If your electric gate won’t open, won’t close, or sounds wrong when it moves, call (855) 927-1091. We’ll give you a straight answer, a written price before work starts, and a technician who works on gates all day, every day. That’s all we do.
Written by Noel Carrington, Owner at Regent Gate Repair, serving Orlando and Central Florida with dedicated electric gate repair and installation.