Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Winter Park
Electric gate repair in Winter Park typically costs between $185 and $475 for most operator and control board failures, with full replacement running $2,800 to $7,500 depending on the system. We’re the gate-only specialists who show up to your Winter Park home knowing exactly what to look for, from a corroded FAAC board on a lakeside estate to a misaligned safety sensor in a 32792 gated community. Call (855) 927-1091 and we’ll diagnose the problem over the phone before we even roll a truck.
Winter Park isn’t like other Orlando-area cities when it comes to gates. The historic homes around the Chain of Lakes carry hand-forged iron and custom cedar entries that predate modern automation, while the newer subdivisions east toward 32792 run LiftMaster and DoorKing operators with full access control. We’ve worked both ends of that spectrum, and we understand what each one demands.
Why Regent Gate Repair Is Winter Park’s Preferred Electric Gate Repair Company
Most gate problems in Winter Park aren’t solved by the first company you call. They’re solved by the first company that actually specializes in gates. That’s us. We don’t repair garage doors, fences, or anything else on the side. Electric Gate Repair is the entire job, which means the technician at your gate has spent their whole career on control boards, loop detectors, safety edges, and swing arms, not split across a dozen unrelated trades.
We service nine major gate-operator brands, which matters more than most homeowners realize. A technician trained only on one brand will misdiagnose a BFT board as a generic failure, or tell you a Ghost Controls opener can’t be saved when it just needs a rebuilt motor. Our crew recognizes brand-specific failure patterns, so we quote the right repair the first time.
Noel Carrington built Regent Gate Repair around a simple idea: gates are complex enough to deserve a dedicated specialist. When you call us for Winter Park service, you get a technician who can name the exact fault on your FAAC board or Mighty Mule swing arm and fix it the same visit, or give you an honest replacement quote if the system has reached its end.
We also handle both repair and new installation under one roof. That’s not a convenience feature, it’s a practical advantage. When a Winter Park homeowner has a gate that’s unrepairable, they don’t need to find a second contractor to replace it. Same company, same technician, one call.
Styles & brands we work with
Gate Opener Repair in Winter Park
Gate Opener Repair in Winter Park’s older neighborhoods often starts with a simple question: is the operator failing, or is the gate itself fighting the operator? In homes around Lake Osceola and the tree-lined streets off Palmer Avenue, we regularly find that the opener’s motor and board are fine, but the gate has settled into the sandy soil below, putting constant strain on the drive arm. Fixing the opener without addressing the settled post means you’ll be calling us again in six months.
A typical gate opener motor replacement in Winter Park runs $225 to $410, while a complete opener swap with new control board and receiver lands in the $850 to $1,600 range. The exact number depends on whether we’re working on a single swing arm on a residential estate or a dual-leaf system on a gated community entrance.
Control Board Diagnostics and Replacement
Older FAAC and BFT boards from the 2000s are common in Winter Park homes that automated their gates 15 to 20 years ago. Many of those boards are now obsolete, and we keep retrofit kits on hand to bring them up to current safety standards without replacing the entire operator. A control board replacement typically runs $280 to $540 in Winter Park.
Swing Arm and Drive Mechanism Repair
When a swing arm fails on a Mighty Mule or Ghost Controls opener, our Winter Park customers usually notice the gate moving slower each week before it stops entirely. We rebuild or replace drive mechanisms on-site in most cases, and we always check the post alignment while we’re at it, because a sagging gate will destroy a new arm just as fast as it destroyed the old one.
Automatic Gate Repair in Winter Park
Automatic Gate Repair in Winter Park covers everything from a keypad that won’t accept codes to a full operator replacement on a commercial entrance. The most common call we get from Winter Park homeowners is a gate that won’t close all the way, and the culprit is usually a misaligned safety sensor or a loop detector that’s been damaged by shifting soil.
For 32792 communities with shared gate entrances, we routinely service DoorKing and LiftMaster operators with vehicle loop detectors and telephone entry systems. Those repairs run $190 to $450 for sensor and loop work, and $1,200 to $3,800 for full operator replacement on a gated community entrance. Residential automatic gate repairs in Winter Park typically stay in the $185 to $600 range.
Safety Sensor and Photocell Alignment
Central Florida’s afternoon thunderstorms knock safety photocells out of alignment more often than people realize. When your gate reverses before closing or beeps and refuses to move, the problem is usually a sensor that’s been nudged by wind or debris. We realign and recalibrate these on-site, and it’s one of the more affordable Winter Park repairs at $110 to $185 per sensor pair.
Loop Detector Repair for Shared Gates
In gated Winter Park communities off Howell Branch Road and University Boulevard, a failed loop detector means residents sit at the entrance tapping their remotes while nothing happens. We replace and retune these detectors, including the saw-cut loops in the pavement, and we coordinate with HOA management on scheduling so the gate is never down longer than necessary.
Trusted Brands We Service in Winter Park
We’re trained and equipped to service Ghost Controls, DoorKing, Elite, and Mighty Mule systems, along with five other major gate-operator brands. That means when a Winter Park homeowner calls with a Ghost Controls opener that’s lost its limit settings, or a DoorKing access system that’s locking out residents, we already know the failure pattern and we likely have the part on the truck. We stock common replacement parts for the brands we see most in Winter Park, so your repair isn’t held up waiting on a shipment.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Winter Park Homes
- Settled hinge posts from sandy soil: Winter Park’s older neighborhoods near the Chain of Lakes sit on soil that shifts with the water table. Gate posts sink and tilt, causing the gate to drag, bind, and eventually destroy the operator. We re-set posts and shim hinges rather than just lubricating them and hoping.
- Obsolete control boards on legacy operators: If your gate was automated in the early 2000s, the board in your FAAC or BFT unit may no longer be supported. We retrofit modern boards that restore safe operation and meet current UL 325 entrapment standards.
- Corrosion and wood warping from humidity: Winter Park’s humid subtropical climate accelerates rust on iron gates and warping on cedar entries. Both put extra load on the operator and throw off the safety sensors. We address the gate’s physical condition and the electronics together, because fixing one without the other doesn’t last.
- Safety sensor failures from storm winds: Afternoon thunderstorms during hurricane season push gates, knock photocells out of alignment, and sometimes take out a branch that lands on a swing arm. If your gate starts beeping and refusing to close after a storm, the sensor alignment is the first thing we check.
Pricing for Electric Gate Repair in Winter Park, FL
Here’s what Winter Park homeowners can expect to pay for common electric gate repairs:
- Diagnostic visit (waived if we complete the repair): $79 to $129
- Safety sensor realignment or replacement: $110 to $185
- Control board replacement or retrofit: $280 to $540
- Gate opener motor replacement: $225 to $410
- Full residential opener swap: $850 to $1,600
- Commercial or gated-community operator replacement: $1,200 to $3,800
You’ll get a written quote before any work starts, and we don’t begin until you’ve approved it. The price we quote is the price you pay. We’ve been doing this long enough to know that the repair bill is the second thing on a Winter Park homeowner’s mind, right after the gate that won’t move. Both get answered up front. For an exact quote, call (855) 927-1091, estimates are free.
We Also Serve Cities Near Winter Park
Beyond Winter Park, we provide Electric Gate Repair in Winter Park and surrounding areas including Azalea Park, Union Park, Goldenrod, and Eatonville. If your gate is acting up and you’re within a short drive of Winter Park proper, give us a call and we’ll get you on the schedule.
Serving Winter Park, FL — Our Local Coverage Area
We’re based in the Winter Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Winter Park
In most Winter Park homes, we can retrofit modern safety features onto an old wrought-iron gate without replacing the gate itself. The key is whether the operator and control board can support current UL 325 entrapment protection, which includes monitored safety sensors and reverse-on-contact sensitivity. If your operator is from the 2000s and the board is obsolete, we’ll typically recommend a new operator paired with your existing gate, which costs far less than a full gate and operator replacement. Call (855) 927-1091 for a free on-site assessment.
Yes, sagging gates in Winter Park are usually fixable without replacing the gate. The problem is almost always a settled hinge post, not a failed gate. We re-set the post in fresh concrete, shim the hinges to restore proper alignment, and the gate swings cleanly again. This is one of the most common repairs we do in older neighborhoods around the Chain of Lakes, and it’s the difference between a gate that lasts another 20 years and one that drags itself to destruction.
Yes. Winter Park has historic preservation guidelines that can affect what you’re allowed to do with a gate on a designated historic property or in a historic district. If your home is a contributing structure, we can help you document that the repair or replacement preserves the gate’s original character while adding modern automation and safety features. We’ve done this for estates around Lake Osceola and along the brick streets near Park Avenue, and we know how to present the work to preservation staff.
If your gate stops and reverses when it hits an obstruction, and if it has working photocells that stop the gate when something crosses the path, you likely have the basics of UL 325 entrapment protection. But older systems from the early 2000s often lack monitored sensors or proper force-sensitivity calibration, and that’s a genuine safety risk, especially in Winter Park neighborhoods with kids and pets. We check every gate we service for UL 325 compliance and can retrofit the necessary protection.
It depends on what’s failed. If the problem is a worn drive gear or a failed capacitor, we can repair it. If the control board is gone, you’re likely looking at a retrofit or replacement, because LiftMaster no longer supports most boards from that era. In Winter Park, we handle many of these older LiftMaster units, and we’ll give you an honest comparison between the repair cost and a new operator rather than pushing you either direction.
If you’re dealing with an electric gate that won’t open, won’t close, or keeps tripping its safety sensors in Winter Park, call us at (855) 927-1091. We’ll diagnose the problem and give you a free, no-pressure quote before any work begins.
Written by Noel Carrington, Owner at Regent Gate Repair, serving Winter Park, FL and surrounding communities since day one.