Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Tangerine
Gate repair in Tangerine, FL usually costs between $240 and $680 for most operator and mechanical fixes, and we can typically reach your property the same day you call. The real challenge most Tangerine homeowners face isn’t the gate itself. It’s the long driveway, the buried wire run, and the sandy soil that eats post footings after a hard rain. That’s the work we know best. If your gate won’t open, sags at the latch, or makes a grinding sound when it moves, call Regent Gate Repair at (855) 927-1091 and we’ll diagnose the exact failure.
Why Regent Gate Repair Is Tangerine’s Preferred Gate Repair Company
We’re a gate-only shop. That matters in Tangerine because the gates out here are not the light aluminum yard gates you see in Mount Dora subdivisions. Tangerine properties run large: 1-acre, 2-acre, 5-acre parcels with 12- to 20-foot double-drive gates, cantilever slide gates on private lanes, and pasture entrances wired for solar openers. A general handyman who does gutters, drywall, and the occasional gate doesn’t have the wiring diagram for a Mighty Mule solar system or the torque specs for a FAAC commercial operator. We do.
Noel Carrington built Regent Gate Repair around one idea: if you work on gates all day, you learn the failure patterns before you even pull up. We know that a dead gate on a Tangerine property with a 300-foot drive is more often a fried control board or a dead battery than a broken hinge. We know sandy soil settles under operator pads and shifts posts after a July downpour. That’s not general contracting knowledge. It’s local gate repair knowledge, and it’s why our Gate Repair team gets called back by the same Tangerine customers year after year.
Styles & brands we work with
Wrought Iron Gate Repair in Tangerine
Wrought iron gate repair in Tangerine almost always comes down to three jobs: seized hinges, sagging leaves, and rust through the bottom rail. Central Florida humidity and daily UV work on bare and powder-coated iron alike, and the sandy soil under a 16-foot iron double-drive gate settles in wet weather until the leaves drop and the latch no longer lines up. We repair the gate rather than slapping a plate over the problem: hinge pins get pulled and greased or replaced, sag is corrected at the hinge post or with a turnbuckle, and rusted sections get cut out and re-welded in matching steel. On a typical Tangerine wrought iron gate repair, expect $180 to $520 for hinge, sag, and small weld work, with larger rust-through repairs running higher depending on section placement.
Seized Hinges and Dropped Leaves
Iron gates on older Tangerine ranch properties often have original barrel hinges that have never been serviced. The gate still moves, but it groans, and the latch side hits the post. We pull the hinge pins, clean or replace them, and re-set the leaf alignment.
Rust Sealing and Weld Repair
Bottom rails and picket bases rust first because they sit near irrigation overspray and sandy splash-back. We grind to clean steel, treat the area, and weld in replacement sections. The goal is a repair that lasts another decade in Tangerine’s humid air, not a cosmetic patch.
Metal Gate Repair in Tangerine
Metal gate repair in Tangerine covers aluminum tube farm gates, welded steel drive gates, and commercial-style cantilever gates on rollers. These are the long, heavy gates: 12 feet, 16 feet, 20 feet, spanning the end of a gravel driveway. The common theme is metal fatigue from daily cycling plus the gradual washout of post footings in well-drained Tangerine sand. When the terminal post leans two degrees, the gate binds on the rack and pinion, the opener’s current draw spikes, and the board eventually burns out. We fix the mechanical alignment first, then address the operator. Typical metal gate repair in Tangerine runs $260 to $620 for post re-setting, track or roller work, and frame straightening; heavier structural repairs on cantilever gates may run higher.
Post Re-setting in Sandy Soil
Tangerine soil drains fast, but that means water moves through it and undercuts footings. We dig out the settled post, pour a deeper base with more concrete than you’d use on clay soil, and brace it true while it cures. The gate hangs correct for years afterward.
Cantilever Track and Roller Repair
When a cantilever gate grinds or jerks, the rollers or the track are usually packed with sand and grit from the drive. We clean, re-align, and replace worn rollers and guide wheels, then re-test the full open-close cycle under load.
Trusted Brands We Service in Tangerine
We work on gate openers from Mighty Mule and LiftMaster every week, plus commercial-grade FAAC and BFT systems on larger Tangerine properties and small farms. Because we focus only on gates, our truck carries the common boards, sensors, remotes, and batteries for these brands, which means fewer return trips. If your Mighty Mule solar opener quits after a lightning storm, or your LiftMaster operator refuses to close all the way, we can usually diagnose the exact fault on the first visit and either repair it then or return with the part in hand.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Tangerine Homes
- Solar opener batteries that won’t hold charge after a storm: Lightning surges travel the long buried low-voltage run along sandy drives and kill control boards and battery backups. The gate freezes in whatever position it was in when the surge hit.
- Post leaning after heavy summer rain: Tangerine’s well-drained sand lets water rush through and undercut footings. A 14-foot gate leaning two degrees binds at the latch and strains the opener motor.
- Gravel and grit in the track and rollers: Long gravel drives scatter fines every time a truck or trailer goes through. Cantilever and slide gates pack grit into roller assemblies and start grinding.
- Hinges seized from rust and UV: Welded steel and aluminum farm gates in Tangerine sit in full sun and humid air all year. Hinge pins corrode, the gate drags, and the opener overloads.
Pricing for Gate Repair in Tangerine, FL
Most gate repair in Tangerine lands between $240 and $680. A simple hinge pin replacement or photocell swap sits at the low end. Re-setting a post in sandy soil or replacing a control board and battery on a solar system lands mid-range. Full frame straightening on a 20-foot cantilever gate or a complete operator replacement runs higher, sometimes $900 to $1,400 when we’re pulling a new low-voltage wire run down a 300-foot drive. We quote the full price before any work starts, and that’s the price you pay. Call (855) 927-1091 for a free estimate on your specific gate.
We Also Serve Cities Near Tangerine
Beyond our work in Tangerine, we regularly repair gates in Mount Dora, Zellwood, Mount Plymouth, and Astatula. Many of our Tangerine customers own or manage property in those areas as well, and the same gate-only crew covers the whole corridor.
Serving Tangerine, FL — Our Local Coverage Area
We’re based in the Tangerine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tangerine
On a Tangerine property with a 200+ foot driveway, a completely dead opener is more often a fried control board, dead battery, or a break in the buried low-voltage run than a failed motor. We check the board and battery first, then ring out the wire run to find breaks. Call (855) 927-1091 and we’ll walk through what you’re seeing before we even dispatch.
Yes. Most Tangerine gates sit at a right of way that has to stay open for neighbors, horse trailers, and daily traffic. We work one side at a time, use manual swing during test cycles, and never leave the gate wedged shut. On a recent gravel-drive property off Sadler Road, a customer’s 16-foot double-drive farm gate quit opening after a July storm. The LiftMaster solar opener had a fried control board and a dead battery, and sandy soil had settled under the operator pad. We replaced the board and battery, re-leveled and re-poured the hinge post footing, and did the sag correction while the panel was off. The gate stayed usable the whole time because we swung it manually between test cycles.
Because Tangerine’s sandy soil drains so fast, heavy rain undercuts post footings and the gate drops at the latch end. The fix is digging out the post, pouring a deeper footing with more concrete than you’d use on clay, and re-aligning the gate while the post cures. A gate that drags will eventually burn out your opener motor if you keep running it.
Yes, we repair and install solar gate openers. Tangerine properties with pastured acreage commonly run Mighty Mule or similar solar kits because the power run from the house is too long and trenching gets expensive. We service the panel, battery, board, and the fence-mounted or post-mounted hardware on these systems.
Yes. Automatic gates must have working entrapment protection: safety photocells across the gate opening or a contact edge that reverses the gate. If your gate closes against a hard object and doesn’t reverse, that protection has failed. We replace sensors and edges as part of normal electric gate repair so your gate meets current safety requirements. Call (855) 927-1091 and we can test yours.
Written by Noel Carrington, Owner at Regent Gate Repair, serving Tangerine and central Florida’s long-driveway gate systems.