Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Casselberry, FL | Regent Gate Repair
We repair Ghost Controls gate operators throughout Casselberry, and here’s the honest answer most homeowners need: when a Ghost Controls arm reverses mid-travel or the board throws a fault, the motor is usually fine. The real culprit on Casselberry’s older driveways and pool enclosures is almost always a settled post, a sagged gate frame, or corrosion from Central Florida humidity. We’re an independent service provider, not authorized or sponsored by Ghost Controls, and we tell you which it is before we sell you anything. Call (855) 927-1091 for a free estimate.
Why Casselberry Residents Choose Us for Ghost Controls Service
Gates are the only thing we do. That matters when your Ghost Controls single-swing arm starts reversing in the afternoon heat and you need someone who already knows the DC control board, the battery behavior, and the arm geometry on these units. Noel Carrington, our owner and lead gate technician, grew up off Votaw Road in South Apopka and spent two decades narrowing his work to automated gate systems before founding Regent Gate Repair. When you call about a Ghost Controls operator in Casselberry, you’re not getting a garage-door tech who also does gates. You’re getting a technician who recognizes brand-specific failure patterns on sight.
We keep Ghost Controls OEM control boards and batteries stocked for the common failure modes, plus stainless fasteners and aftermarket brackets for the corrosion problems OEM parts don’t hold up against in this climate. From the control board to the hinge, we diagnose the whole system, not just the part that stopped moving. And we handle electric gate repair as a core service, not an upsell. If your Ghost Controls unit turns out to be beyond saving, we’re the same company that can install a replacement, so you don’t need a second contractor. That’s the convenience of calling a dedicated gate repair shop.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Casselberry
Tell me the model number and I can usually tell you the problem before I pull in the driveway. Here’s what we see most often on Ghost Controls units across Casselberry’s 32707, 32718, and 32730 zip codes:
- Low-voltage DC arms that reverse mid-travel. Ghost Controls AXS1, AXTB, and DS1 arms run on 12-24V DC, and when the gate frame has sagged on Casselberry’s sandy soil, the arm hits resistance and reverses. Owners think the motor died. It hasn’t. The gate needs realignment to the operator’s travel path.
- Control-board and battery faults after thunderstorms. Central Florida’s summer storms bring surges and GFCI trips that scramble Ghost Controls boards. We see this constantly on humid installs where moisture finds its way into the control box. Often it’s a reset and a proper weather seal, not a new board.
- Corroded arm brackets, hinge pins, and fasteners. Casselberry’s humidity and iron-rich well water in some older areas accelerate oxidation on aluminum pool-cage gates. OEM steel brackets rust through, hinge pins seize, and the operator strains against a gate that no longer swings freely.
- Keypad, remote, and receiver pairing failures. Ghost Controls wireless accessories lose range or drop pairing when the control box fills with humidity or insect debris. We clean, reseal, and reprogram, then verify the receiver actually holds through a storm cycle.
- Battery decline on solar-powered Ghost Controls kits. Solar and low-voltage DC operator kits depend on batteries that age faster in Florida heat. If your Ghost Controls solar unit opens fine in the morning but stutters by evening, we check the battery’s actual state of charge before recommending replacement.
Ghost Controls Service in Casselberry: What Local Conditions Mean for Your Equipment
Casselberry’s 1970s – 80s pool-cage boom left original aluminum enclosure gates all over town, and those hinge posts sink and misalign in the sandy soil after summer rains. Here’s what that means for Ghost Controls owners specifically: a Ghost Controls operator gets blamed for a gate whose post has settled rather than a motor that has died. The arm reverses or strains because the gate is dragging or binding against its own frame, not because the DC motor failed. We saw this exact scenario on a mid-century block in the 32707 side of Casselberry when a homeowner’s Ghost Controls single-swing kit kept reversing partway open every afternoon. Our tech found the aluminum pool-cage gate’s hinge post had sunk a half-inch after the wet season, so the arm was fighting a misaligned gate. We reset and re-plumbed the post, realigned the gate to the operator, replaced the corroded arm bracket with stainless hardware, and re-tested the limit travel. The opener has run clean since. That’s the difference between replacing a $400 board and fixing a $150 post reset. A garage-door shop diagnosing from a phone call will sell you the board. We find the post.
Ghost Controls Models & Products We Service in Casselberry
We work on the full Ghost Controls residential lineup: the Architect series single-swing opener (AXS1 and AXTB), the Heavy-Duty Dual Swing (TDS), the single-swing DIY kit (DS1), and solar and low-voltage DC operator kits. For parts, we fit Ghost Controls OEM control boards, arms, and batteries where the unit is worth keeping. In humid conditions where OEM steel brackets and fasteners are the weak link, we switch to quality aftermarket stainless brackets and hardware. If a gate frame is rotted or a control box is water-damaged past saving, we say so directly rather than selling a part that will fail again next wet season. That’s the repair-or-replace honesty Casselberry homeowners expect from a dedicated Ghost Controls sales & service specialist.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Casselberry
Ghost Controls repair pricing in Casselberry typically runs between $150 and $450 depending on the failure. What drives the cost: a simple relay or limit-switch reset lands at the low end. A control-board replacement with OEM parts, a battery swap on a solar kit, or a full arm re-alignment with stainless bracket replacement lands higher. A full operator replacement, where the unit is beyond repair, runs $1,200 to $2,800 installed. We quote the price and get your agreement before any work starts. Our free estimate includes diagnosing the actual fault, not a guess. Call (855) 927-1091 for an exact quote; estimates are free and we will not start a repair until you have approved the number.
Serving Casselberry, FL — Our Local Coverage Area
We’re based in the Casselberry area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Casselberry
Usually not. Afternoon heat expands metal, and if your gate frame or hinge post has shifted, the expansion makes the gate bind, which tells the Ghost Controls DC board to reverse. We check the gate’s alignment and post plumb before touching the board. Call (855) 927-1091 and we will diagnose it properly.
We service the full Ghost Controls DC lineup, including solar and low-voltage kits. We test battery state of charge, solar input, and board function, then replace only what actually failed. If you are in Casselberry and your solar unit is sluggish by evening, call (855) 927-1091.
Yes. We remove the rusted hardware, replace hinge pins and brackets with stainless components, realign the gate to the Ghost Controls arm, and re-test the full travel. This is one of the most common calls we handle in Casselberry’s older pool-cage neighborhoods. Call (855) 927-1091 for a free estimate.
Yes, if the control box is sealed and the antenna is positioned correctly. We open the receiver box, clean out humidity and insect debris, reseal the enclosure, and reprogram the accessories. If the box has been water-damaged, we tell you before selling a replacement. Call (855) 927-1091.
We do. Regent Gate Repair works on nine gate-operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, including Ghost Controls in Longwood. If your neighbor needs a different brand serviced, we can handle that too. Call (855) 927-1091.
Service Areas Near Casselberry
Beyond Casselberry, we serve several nearby communities. For homeowners just outside the city, we offer Ghost Controls service in Mount Plymouth and Ghost Controls service in Wekiwa Springs. We also take calls from Flagler Beach, North DeLand, Lake Helen, De Leon Springs, DeLand, and De Land Southwest. For a full list, see our Casselberry service area page.
Book Your Ghost Controls Service in Casselberry Today
If your Ghost Controls opener is reversing, straining, or dead, call (855) 927-1091. We diagnose the real fault, quote the price before any work starts, and handle the repair or replacement with the same team. Same-day service is available for most Ghost Controls repair calls in Casselberry and Ghost Controls service in Winter Springs.
Written by Noel Carrington, Owner at Regent Gate Repair, serving Casselberry, Ghost Controls repair in Fern Park, and nearby Central Florida communities.