Ghost Controls Gate Repair in Tavares, FL

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Repair in Tavares, FL | Regent Gate Repair

We provide independent Ghost Controls gate repair across Tavares, FL, and the thing that makes our work here different is simple: this is a peninsula city, so most Ghost Controls operators we service sit within sight of Lake Dora or Lake Eustis, where humidity, sandy soil, and storm wind hit the lake-facing side of a gate years before the sheltered side shows any wear. That means a Ghost Controls “motor failure” in Tavares is often a post that settled, a battery terminal that corroded, or a bracket that worked loose in the wind. Call (855) 927-1091 for a free estimate, and tell us the model number and we can usually tell you the problem before we pull in the driveway.

Call (855) 927-1091

We’re Regent Gate Repair, and gates are the only thing we work on. We service Ghost Controls low-voltage and solar operators every week across Lake County, not as a side line but as our entire trade. If you live anywhere in the 32778 ZIP, we’re local to you. For more on our broader coverage, see our Tavares service area page. If you’re looking at a Ghost Controls unit, we can walk you through what’s actually wrong before we ever roll a truck.

Why Tavares Residents Choose Us for Ghost Controls Service

Noel Carrington, our owner and lead gate technician, grew up off Votaw Road in South Apopka, where half the driveways he passed had a busted gate or a rusted hinge nobody had gotten around to fixing. He picked up his electrical and mechanical training at Seminole State College in Sanford, then spent nearly two decades narrowing his focus entirely to automated gate systems, including Ghost Controls service in Tangerine. So when a Ghost Controls arm throws a fault code in Tavares, the person on the phone isn’t reading from a script. He’s someone who keeps common parts on the truck and usually has the gate moving again before lunch.

We’re a Ghost Controls sales & service shop in the sense that we know the equipment from the inside, but we’re independent, not manufacturer-authorized. That matters because we diagnose the whole gate – posts, hinges, battery, control board – before anyone blames the operator. We don’t sell you a new unit when the real problem is a hinge post that settled three inches in sandy Lake County soil.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Common Ghost Controls Gate Repair Problems We Solve in Tavares

These are the specific failures we see repeatedly on Ghost Controls systems around Lake Dora, Lake Eustis, and the manufactured-home communities that frame much of Tavares:

  • Control board and battery terminal corrosion. Year-round Lake Dora humidity creeps into the operator housing, and by August an opener that powered up fine in spring starts dropping remote commands. We clean or replace corroded terminals and bench-test the board before anything else.
  • Arm binding from post settlement. Sandy, well-drained Lake County soil lets lakefront and manufactured-home gate posts settle and drift out of plumb. The Ghost Controls arm then binds, reverses, or stalls against a gate that moved, not a motor that failed. We re-plumb posts, shim brackets, and reset arm limits.
  • Solar-charged DC pack failures after lightning season. Tavares gets heavy summer thunderstorms and frequent lightning. Solar Ghost Controls kits take the hit through their charge controllers and battery packs, producing “dead operator” calls that are really battery and charge-controller failures. We test the pack, not just the motor.
  • Sagging double swing gates from hurricane-zone wind loads. Wide double swing gates along the waterfront take hurricane-season wind on their full face. Anchor bolts and hinge brackets work loose, the gate sags, and the Ghost Controls arm fights geometry it was never set for. We re-anchor, re-hang, and re-time the arms.
  • Remote range dropping to near zero. This one usually starts with a corroded battery terminal or a failing antenna connection on the Ghost Controls receiver, not the remote itself. We test range at the arm, not at the front door.

Ghost Controls Service in Tavares: What Local Conditions Mean for Your Equipment

Here’s the thing about servicing Ghost Controls gates in Tavares that doesn’t show up on a manufacturer’s support page. This city sits on a peninsula jutting into Lake Dora, and a large share of our calls come from gates within sight of Lake Dora or Lake Eustis, where humidity and storm wind hit the operator on one face while the sheltered side looks new. Because county and marina security gates share the same streets as lakefront driveways, our van carries both residential and heavier-duty brackets on the same run. That split is not something a technician in Leesburg or Ghost Controls in Mount Dora is carrying around, and it changes what we stock and what we check first.

On a lakefront driveway off the Lake Dora shoreline, a homeowner’s Ghost Controls service in Silver Lake would cover a dual swing kit that had begun reversing halfway open every afternoon. Our tech found the arm pushing a gate whose sandy-soil posts had settled several inches over a wet summer, so we re-plumbed the hinge posts, shimmed the brackets, and reset the arm limits. The operator itself never needed replacing. A second stop that week was a manufactured-home community near Lake Eustis, where a corroded battery terminal on a solar Ghost Controls kit was killing remote range until we cleaned and replaced the connectors. Both were “Ghost Controls failures” in the customer’s mind. Neither was the operator’s fault.

Ghost Controls Models & Products We Service in Tavares

We work on the full Ghost Controls residential line, including the Heavy-Duty Single Swing kit (TSS1), the Heavy-Duty Dual Swing kit (TDS2), the slide/rack-and-pinion opener line, and the solar-charged DC operator kits with battery backup. For a Tavares gate within sight of Lake Dora, we pay close attention to the solar DC kits because the charge controller and battery pack are the first things that fail in this climate.

On parts, we use OEM Ghost Controls control boards, arms, and battery packs where the original is rebuildable. For hinges, brackets, and fasteners, we often switch to stainless or heavier-gauge aftermarket hardware because the standard stuff rusts out fast in lake humidity and salt air. If your operator tests healthy on the bench, we tell you straight that the repair is a post, hinge, or alignment job rather than selling you a new unit.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Service Pricing in Tavares

Service calls for Ghost Controls repair in the 32778 ZIP typically run from $95 to $149 for the diagnostic visit, which covers the trip, the bench test, and a written quote. The most common repairs fall in these ranges:

  • Control board replacement: $180 to $340 depending on the Ghost Controls board revision
  • Battery pack replacement (solar DC kits): $80 to $160
  • Post re-alignment and shimming: $150 to $300
  • Hinge and bracket replacement with stainless hardware: $120 to $250 per side
  • Full gate re-hang with arm reset: $250 to $450

Everything is quoted and agreed before we start any work. The price we give you is the price you approve, and if we find something else once we open the operator, we stop and show you before we touch it. Call (855) 927-1091 for an exact quote. Estimates are free.

Serving Tavares, FL — Our Local Coverage Area

We’re based in the Tavares area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Ghost Controls Gate Repair in Tavares

Service Areas Near Tavares

We service Ghost Controls gates throughout the 32778 ZIP and the surrounding Lake County area, including Flagler Beach, North DeLand, Lake Helen, De Leon Springs, DeLand, and DeLand Southwest. If you’re just outside Tavares, check our Ghost Controls service in Merritt Island or Ghost Controls service in Orlando pages for more specific coverage details.

Book Your Ghost Controls Service in Tavares Today

If your Ghost Controls gate is acting up in Tavares, call (855) 927-1091 for a free estimate. We’re gate-only technicians who work on this equipment every week, and we’ll tell you straight what’s wrong and what it costs before any work starts.

Written by Noel Carrington, Owner and Lead Gate Technician at Regent Gate Repair, serving Tavares and Lake County with dedicated gate repair and installation.

Need Gate Repair help in Tavares? Licensed & insured · 60-minute response · free estimates
Call (855) 927-1091
Areas We Serve

Request a Free Estimate in Tavares

Tell us what you need — Regent Gate Repair responds fast. No obligation.

By providing your information above, you acknowledge our Privacy Policy and authorize us to contact you via phone, email, or SMS about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch