Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Silver Lake, FL | Regent Gate Repair
We provide independent Ghost Controls gate repair across Silver Lake, from swing-arm openers on long private drives to solar-charged dock gates on the Harris Chain. What makes our work here different is simple: most Silver Lake Ghost Controls failures trace back to lake humidity, corrosion, and storm-season ground settling, not the control board itself. We diagnose the whole system, not just the error code. Call (855) 927-1091 and tell me the model number and I can usually tell you the problem before I pull in the driveway.
Why Silver Lake Residents Choose Us for Ghost Controls Service
Gates are the only thing we do. Not garage doors, not fencing, not general contracting. Every service call we run in Silver Lake is a gate call, which means our technicians see Ghost Controls operators in the specific conditions this community throws at them week after week. Noel Carrington, our owner and lead technician, grew up off Votaw Road in South Apopka and has spent nearly two decades narrowing his focus entirely to automated gate systems, from residential swing arms to commercial slide operators. That single-trade depth matters when a Ghost Controls board is throwing a fault and the real issue is a corroded battery terminal hidden behind the enclosure.
We’re an independent service company. We are not authorized, sponsored, or endorsed by Ghost Controls. What we are is experienced with their solar and low-voltage DC swing and slide units, keypads, and phone-entry modules, and we keep Ghost Controls-spec parts on the truck so most Silver Lake repairs happen in one visit. For lakefront properties, we go a step further and stock marine-grade stainless hinges, latches, and fasteners, because standard galvanized hardware on a dock gate near the water corrodes within a season.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Silver Lake
- Control box moisture intrusion on dock and boat-lift gates. Silver Lake’s year-round humidity and irrigation overspray leave standing condensation inside Ghost Controls enclosures. We open them, dry them out, replace any corroded connections, and reseal them properly.
- Corroded battery terminals and failed charge behavior on solar units. Solar panels shaded by oaks or fouled with pollen and lake debris stop charging, and the battery terminals turn green. We test the panel output, replace batteries and terminals as needed, and re-aim panels for real sun exposure.
- Arm and bracket binding after storm-season ground settling. When a driveway gate shifts out of plumb on Silver Lake’s sandy soil, the Ghost Controls arm stalls or reverses and the homeowner thinks the board failed. We re-plumb the gate and align the operator, then verify the limits.
- Lightning and surge damage to control boards and receiver modules. Central Florida’s summer thunderstorms hit gates at the end of long private drives especially hard. We replace damaged boards and add surge protection where it’s missing.
- Keypad and phone-entry module failures from moisture and heat. Keypads mounted on unshaded posts off Silver Lake driveways cook in the UV and fail from condensation. We replace them with units sealed for this climate and wire them correctly.
Ghost Controls Service in Silver Lake: What Local Conditions Mean for Your Equipment
Silver Lake is an unincorporated, heavily lake-dotted community in Lake County, ZIP 34788, where most properties are waterfront or near-waterway lots with private drives, docks, and outbuildings. That shapes the Ghost Controls repair work here in a way you won’t find in nearby Leesburg, Ghost Controls in Eustis, or The Villages. Those areas are dominated by HOA-style subdivision entry gates. Silver Lake calls are dominated by dock and boat-lift security gates and long private-drive gates exposed to constant lake humidity. A Gate opener that would run for years in a dry inland subdivision can fail here within 18 months if the enclosure isn’t sealed and the hardware isn’t marine-grade. We see it constantly.
On a waterfront lot off the Harris Chain waterways, a homeowner’s Ghost Controls solar swing operator on the dock gate had quit altogether. Our tech found the battery terminals green with corrosion and the control box holding condensation while the panel sat half-shaded by an oak. We cleaned and resealed the enclosure, replaced the battery and terminals, re-aimed the panel, and then re-plumbed the gate and swapped the hinge hardware to stainless so the arm wasn’t fighting a sagging dock gate. The operator ran clean through the next storm cycle.
Ghost Controls Models & Products We Service in Silver Lake
We work on the full range of Ghost Controls equipment, including the Heavy-Duty Single Swing (TSS1) and Dual Swing (TDS2) opener kits, slide operator kits for tube and ornamental sliding gates, and solar-charged DC systems with keypad, remote, and phone-entry accessories. On the repair side, we fit Ghost Controls-spec control boards, arms, batteries, and accessories. On the hardware side, we upgrade lakefront and dock gates to stainless hinges, latches, and fasteners where standard galvanized parts are already failing. If a board, arm, or battery is the only real fault, we repair it. When the operator housing, gearing, and mounts are all compromised by corrosion, we tell the owner plainly that replacement is the cheaper path.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Silver Lake
Ghost Controls gate repair in Silver Lake typically runs between $180 and $340 for most service calls, depending on what failed and whether we’re replacing a battery, a board, or an arm. Keypad and phone-entry module replacements add cost on top of the base service fee. What drives the price here is parts and any hardware upgrades needed for lakefront conditions. A simple battery swap costs less than a control board replacement with surge protection. Every job gets a written quote before any work starts, and our estimates are free. The price you agree to is the price you pay. Call (855) 927-1091 for an exact quote on your Ghost Controls system.
Serving Silver Lake, FL — Our Local Coverage Area
We’re based in the Silver Lake area and know this community well, and we also provide Ghost Controls service in Mount Dora. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Silver Lake
Usually not. In Silver Lake, a Ghost Controls solar unit that won’t hold a charge is most often a battery or charging problem, not a motor failure. Corroded terminals, a shaded or fouled panel, or a failing battery are the typical culprits. We test the panel output and battery health before touching the motor. Call (855) 927-1091 and we’ll diagnose it on site.
A swing gate that reverses mid-cycle is usually fighting something, and on Silver Lake’s sandy soil, that something is often a gate that has settled out of plumb after a storm. The operator senses resistance and reverses as a safety response. We check the gate alignment, hinge condition, and limit settings before assuming the board is at fault.
Yes. We replace and rewire Ghost Controls keypads and phone-entry modules throughout Silver Lake, and we use units sealed for Central Florida’s heat and humidity. If your keypad is unresponsive or works intermittently, it’s often moisture behind the faceplate or a failed receiver connection. We diagnose both.
We do. Many Silver Lake properties date from the 1970s through 2000s and have long private drives with chain-link or ornamental metal gates. We handle the full system, from the operator and control board to the hinges, posts, and latch hardware, including upgrades to stainless where corrosion has set in.
No. We are an independent service company, not authorized, sponsored, or endorsed by Ghost Controls. We service the brand on our own technical credentials and experience, which comes from working on Ghost Controls operators across Lake County every week, including Ghost Controls service in Tavares. The parts we install are Ghost Controls-spec. The labor and the diagnostic judgment are entirely ours.
Service Areas Near Silver Lake
Beyond Silver Lake, our crews cover the surrounding Lake County and Central Florida communities, including Flagler Beach, North DeLand, Lake Helen, De Leon Springs, DeLand, and De Land Southwest. We also run Ghost Controls service calls in Ghost Controls service in Orlovista and Ghost Controls service in Holden Heights. For broader coverage, see our Silver Lake service area page, and for more on our work with this brand, visit Ghost Controls sales & service.
Book Your Ghost Controls Service in Silver Lake Today
If your Ghost Controls gate is down in Silver Lake, call (855) 927-1091 for a free estimate. We carry common Ghost Controls parts on the truck and can usually get your gate moving the same visit. From the control board to the hinge, we’re the gate specialists for this community.
Written by Noel Carrington, Owner and Lead Gate Technician at Regent Gate Repair, serving Silver Lake, Ghost Controls in Umatilla, and surrounding Lake County communities.