Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Longwood, FL
Gate installation in Longwood usually means replacing a 20-to-40-year-old iron or aluminum driveway gate that’s rusted through at the bottom rail or seized beyond repair. Longwood’s 1970s-1990s housing stock sits on mature, heavily treed lots, so our install crews regularly work around oak roots, narrow side setbacks, and existing brick pillars that need to be reused. If you’re weighing repair against replacement on an aging automated gate, call us at (855) 927-1091 and we’ll give you a straight answer on which makes sense.
Why Longwood Homes Are Different
Longwood gates live under a canopy. Live oaks, pines, and Spanish moss aren’t just scenery here; they drop organic debris onto gate tracks, rollers, and operators every single day. Combine that with Central Florida’s humidity and near-daily summer thunderstorms, and you get a very specific failure profile: rusted hinge pins, mildewed control boards, corroded limit switches, and surge-damaged motors. We see more lightning-related board failures in Longwood than in most Seminole County ZIP codes, and the fix is rarely the motor itself. It’s usually the surge suppressor, a blown fuse on the control board, or a battery backup that took a spike.
The housing stock matters too. Longwood is not a new-construction market. Most of the 32750 and 32779 homes we visit were built between the 1970s and 1990s, and many still have their original gate operators, or a first-generation replacement. Homeowners in neighborhoods like Shadow Hills, Alaqua, and the Springs tend to repair rather than replace, because the gate itself still has decades of life in the frame, even when the automation doesn’t. The result is that a typical Longwood call is a diagnostic job: figure out what actually failed, fix that component, and leave the rest alone. That’s a very different repair from what a new subdivision would need.
Styles & brands we work with
Our Main Longwood Services
Longwood homeowners tend to call us for one of two things: a gate that stopped moving, or a gate that still moves but no longer does it reliably. Here’s what each involves locally.
Gate Repair in Longwood
Mechanical gate repair in Longwood is usually about rust, misalignment, or sag. Hinges seize, weld points crack, and the bottom rail of a steel gate can blow out after years of sitting in humid mulch and leaf litter. On masonry-pillar lots, we’re often re-hanging a gate that’s dropped enough to drag on the driveway. We disassemble, clean or replace hardware as needed, reinforce the frame where rust has thinned it, and re-align the gate so it swings or slides cleanly. Gate Repair in Longwood covers the full mechanical scope.
Electric Gate Repair in Longwood
Electric gate repair in Longwood is its own specialty, and it’s the call we get most often after afternoon storms. An operator that worked yesterday and won’t move today is typically a blown control-board fuse, a tripped surge suppressor, or a battery that’s no longer holding charge after cycling during an outage. We work on LiftMaster, FAAC, BFT, and Linear boards, among others, so we can usually identify the failed component on the first visit rather than guessing. Electric Gate Repair in Longwood walks through the full diagnostic scope.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Longwood
Gate installation in Longwood usually means putting a properly built, corrosion-resistant gate and operator on a lot where the original system has finally reached the end of its useful life. The humid, tree-heavy environment here means material choice matters more than it would elsewhere: powder-coated aluminum and galvanized steel hold up far better than raw iron, and operators need real surge protection. If you’re replacing a failing gate, we can also assess whether your existing operator can be reused or whether it makes more sense to install a matched new system at the same time. That decision affects both cost and long-term reliability. Our Gate Installation service covers everything from a simple manual replacement to a fully automated access system.
Automatic Gate Installation
Signs you need it
Your gate opens and closes erratically, the operator is more than 10 – 15 years old and parts are no longer available, or you’ve had multiple storm-related board failures in a single season.
What it costs in Longwood
Automatic gate installation in Longwood typically lands between $2,500 and $8,500 depending on gate material, operator brand, and whether we’re reusing your existing pillars or pouring new footings.
How we do it
We remove the old gate and operator, set or shore up the posts, install the new gate and matched operator, then run and test all wiring, sensors, and loop detectors before we leave.
Driveway Gate Installation
Signs you need it
The gate sags, drags on the driveway, or has rusted through at the bottom rail, and repeated repairs are no longer cost-effective.
What it costs in Longwood
Driveway gate installation in Longwood runs $2,000 to $7,500 for most residential jobs, with the final number driven by gate width, material, and whether automation is included.
How we do it
We measure the opening and the existing posts, fabricate or order the gate to fit, hang it with new or refurbished hardware, and align the swing or slide path so it operates cleanly.
What Gate Installation Costs in Longwood
| Item | Typical range in Longwood |
|---|---|
| Manual driveway gate, steel or aluminum, no operator | $1,800 – $5,000 |
| Automatic gate with standard residential operator | $2,500 – $7,500 |
| Automatic gate with commercial-grade operator (FAAC, BFT, DoorKing) | $5,000 – $10,000 |
How long does gate installation take in Longwood?
Most residential gate installations take one to two working days on site. Custom gate fabrication can add a week or more, depending on the material and where the gate is being made.
Do you handle the electrical run for a new Longwood gate?
Yes. We run the low-voltage and line-voltage wiring, install the operator, loop detectors, and safety edges, and test the full system before we consider the job done. Call (855) 927-1091 for a written quote.
Brands We Service in Longwood
We’re factory-trained on the operator brands Longwood homeowners and property managers actually run: FAAC, BFT, Linear, Viking, LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. We stock common boards, remotes, and sensors for the residential brands, so a typical repair doesn’t wait on parts. For commercial-grade boards on FAAC, BFT, Linear, and Viking systems, we source directly from distributors and can usually have parts in hand within a couple of business days. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Longwood, FL
| Service | Typical range in Longwood |
|---|---|
| Gate operator diagnostic call | $89 – $149 |
| Control board replacement (residential) | $300 – $700 |
| Limit switch or sensor replacement | $150 – $350 |
| Hinge or roller replacement | $200 – $500 |
| Gate re-hang and alignment | $300 – $800 |
| Surge suppressor installation | $150 – $300 |
| Manual gate installation (no operator) | $1,800 – $5,000 |
| Automatic gate installation (residential operator) | $2,500 – $7,500 |
| Automatic gate installation (commercial operator) | $5,000 – $10,000 |
| Battery backup replacement | $200 – $450 |
What pushes a Longwood job toward the upper end of these ranges is usually the gate’s condition and the site. Gates that have rusted in humid shade for 30 years take longer to disassemble and often need new hardware rather than cleaned hardware. Masonry pillars that have shifted from tree roots can also require resetting before a new gate will hang true. Whatever the scope, we quote the full price upfront and you approve it before any work starts.
Neighborhoods We Serve in Longwood
We work across Longwood’s 32750, 32752, 32779, and 32791 ZIP codes, including the older tree-canopied neighborhoods where most of our gate work happens. Response for most Longwood neighborhoods is same-day for emergencies and within one to two business days for scheduled work.
- Shadow Hills
- Alaqua
- The Springs
- Springs Landing
- Wekiva Hills
Service Area – Cities Near Longwood
We also handle gate repair and installation throughout central Seminole County and the surrounding area. If you’re in Lake Mary, FL, Casselberry, FL, Winter Springs, FL, or Altamonte Springs, FL, we cover those areas with the same gate-only specialty and the same upfront pricing.
Serving Longwood, FL — Our Local Coverage Area
We’re based in the Longwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Longwood
For an emergency, like a gate stuck open or closed on a 32750 home, we can usually reach you the same day. Scheduled diagnostics and installations are typically booked within one to two business days. Call (855) 927-1091 and we’ll tell you exactly when we can be there.
In most Longwood neighborhoods, replacing an existing gate on its current posts doesn’t require a permit. Adding a new operator or running new line-voltage wiring sometimes does, and we’ll tell you during the quote if yours is one of those jobs. We handle the paperwork on our end when it’s needed.
That describes most of what we see in Longwood. Older gates usually have serviceable frames and hardware we can restore, but the operator may need a board, a battery, or a full replacement. We’ll show you what’s actually failed before you approve any work, and the price is always set before we start.
If your Longwood gate is down, damaged, or simply at the end of its life, call Regent Gate Repair at (855) 927-1091. We’re gate specialists, we know the brands and the climate, and we’ll give you a free estimate on repair or replacement before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Longwood Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Jeff Ackerman"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Daniel Novak"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Cole Mercer