Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Maitland, FL
Gate installation in Maitland means working with heavier, custom-fabricated iron and aluminum gates on lake-access properties, not the light builder-grade tube gates you see in newer Orlando subdivisions. Most Maitland homes along the Winter Park-adjacent corridor were built between the 1950s and 1980s, and their driveway gates were added later, often custom, often on stone or brick columns that have settled over decades of subtropical rain. That changes how we anchor posts, run power, and set operators. If your gate is sagging, stalled, or you’re planning a new one on a wooded Maitland lot, call Regent Gate Repair at (855) 927-1091 for a free estimate. We handle repair and full replacement under one roof, from the control board to the hinge.
Why Maitland Homes Are Different
Maitland’s ZIP codes 32751 and 32794 cover a pocket of lakes and old oak canopy that behave nothing like the surrounding Orlando sprawl. Driveway gates here sit under dense live-oak and laurel-oak branches that drop acorn caps, leaves, and Spanish moss into operator housings year-round. After a summer thunderstorm, it’s common for us to find a perfectly good LiftMaster or FAAC operator that simply stalled because organic debris jammed the travel path or fouled the limit switches. The gate didn’t fail. It got buried in tree litter.
The housing stock compounds the challenge. Mid-century ranch homes and lakefront estates often have wrought-iron gates installed decades after the house was built, bolted to driveway surfaces that have cracked and shifted. Cantilever and swing gates on these lots sit at slight angles now, which wears hinge bearings and makes the operator work harder every cycle. Add the long rainy season, and we see rust at weld points and hinge pins on older iron gates, plus corrosion inside control boxes that weren’t sealed against Maitland’s humidity. These aren’t mysteries to us. They’re the job.
Styles & brands we work with
Our Main Maitland Services
Most Maitland homeowners call us for one of two reasons: a gate that stopped working, or an electric opener that quit responding after a storm. Here’s how each service plays out in Maitland specifically.
Gate Repair in Maitland
Mechanical gate repair in Maitland usually starts with the gate itself: rusted hinge pins on wrought-iron driveway gates, a sagging cantilever gate that scrapes the driveway, or a swing gate that binds because the column shifted. Older iron gates here have decades of irrigation and lake humidity working against them, and weld failures at hinge points are common. We cut out the rusted section, re-weld, replace bearings, and re-align the gate so the operator isn’t fighting a mechanical problem. For the full picture of mechanical repair work in Maitland, see our Gate Repair in Maitland page.
Electric Gate Repair in Maitland
Electric gate repair in Maitland is half electrical diagnostics, half storm cleanup. Lightning strikes and power surges during afternoon thunderstorms take out control boards on LiftMaster, Linear, and BFT operators more often than motors actually fail. We also handle loop detectors that won’t sense a car, safety sensors knocked out of alignment by limbs, and keypad or intercom systems that stopped communicating. If your operator hums but won’t move, or the gate opens but refuses to close, that’s the work we do every day. For more on electrical and automation repair specific to Maitland, read Electric Gate Repair in Maitland.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Maitland
Gate installation in Maitland means anchoring a gate on older concrete or paver driveways, often under mature oak canopy, and sizing an operator that can cycle reliably through seasonal debris and humidity. Many homes here were never built with a gate, so the job involves running conduit for power and low-voltage wiring across established landscaping without tearing up the yard. Regent Gate Repair handles the full job, from excavation and post setting to operator programming and safety-edge testing, so you’re not coordinating between a fence company and an electrician. Visit our Gate Installation page for the complete scope of this service.
Automatic Gate Installation
Signs you need it
You’re opening and closing the gate by hand every day, or you’ve had a manual gate for years and now need controlled access after adding a pool, boat storage, or a home office.
What it costs in Maitland
Automatic gate installation in Maitland typically runs $1,800 to $12,000 depending on operator type, gate weight, and whether we’re adding intercom, keypad, or loop-detector access.
How we do it
We survey the driveway grade and gate weight, pour or anchor steel posts, mount the operator, run power and control wiring, then program travel limits and safety entrapment protections before testing full cycles.
Gate Installation Services
Signs you need it
Your existing gate is rusted through at the welds, the frame is bowed past repair, or you’ve bought a Maitland home with no gate and want secure, defined access from the street.
What it costs in Maitland
Full gate installation in Maitland with materials and labor generally falls between $3,500 and $10,500 for residential gates, with custom wrought-iron or aluminum work pushing toward the upper end.
How we do it
We measure the driveway opening, fabricate or order the gate to spec, set and level the posts, mount the gate, install hardware and access controls, then verify alignment and cycle it repeatedly.
What Gate Installation Costs in Maitland
| Item | Typical range in Maitland |
|---|---|
| Full gate installation (materials, labor, hardware) | $3,500 – $10,500 |
| Automatic gate installation with operator | $1,800 – $12,000 |
| Electric gate installation including power run | $2,800 – $9,500 |
Do you handle the power run and the safety edges?
Yes. We run the electrical conduit from your panel or an existing outdoor circuit to the operator location, and every automatic gate we install includes tested safety edges and photo-eye entrapment protection. Call (855) 927-1091 for site-specific pricing.
Will my Maitland HOA need to approve the gate?
Most Maitland neighborhoods with HOAs require architectural review before a new driveway gate or operator goes in. We’ve installed enough gates in this market to know what those boards look for: setback, finish color, and post material. Call us for guidance before you submit.
Brands We Service in Maitland
We work on LiftMaster, FAAC, BFT, and Linear operators, including older FAAC and LiftMaster boards that general contractors won’t touch. We keep common control boards, loop detectors, and safety sensors available for quick turnaround in Maitland, and we can source brand-specific parts for less common failures without making you wait through a second service call. See our brands for the full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Maitland, FL
| Service | Typical range in Maitland |
|---|---|
| Gate repair service call | $80 – $150 |
| Electric gate repair | $200 – $650 |
| Full gate replacement or installation | $3,500 – $10,500 |
| Automatic gate installation | $1,800 – $12,000 |
| Electric gate installation | $2,800 – $9,500 |
| Driveway gate installation | $3,500 – $10,500 |
| Sliding gate installation | $4,000 – $12,000 |
| Gate opener system installation | $1,800 – $6,500 |
In Maitland, the biggest price drivers are lot conditions: older concrete that needs cutting for conduit, root intrusion under posts, and operators that need upgrading to handle a heavier custom gate. Every job we quote is priced before any work begins, and you approve that number before we touch a tool.
Neighborhoods We Serve in Maitland
We work throughout Maitland’s 32751 and 32794 ZIP codes, from the lakefront streets off Lake Maitland and Lake Sybelia to the older ranch-home neighborhoods east of I-4. Response time for most repair calls is same-day or next-day, and we schedule installations within a week in most cases.
- Lake Maitland lakefront
- Dommerich Hills
- Maitland Central
- Druid Hills
- English Estates
Service Area – Cities Near Maitland
If you’re just outside Maitland, we likely cover you too. Regent Gate Repair regularly serves Eatonville, FL, Fern Park, FL, Forest City, FL, and Lockhart, FL. If you’re unsure whether we reach your street, call (855) 927-1091 and we’ll confirm your address.
Serving Maitland, FL — Our Local Coverage Area
We’re based in the Maitland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Maitland
Most repair calls in Maitland are scheduled same-day or next-day, depending on the time of your call and how many emergency calls are already on the board. Storm-related electrical failures tend to spike after afternoon thunderstorms, so call early if your gate won’t close and you need it secured overnight. Phone (855) 927-1091 for today’s availability.
Most residential gate installations in Maitland don’t require a building permit, but larger automatic gates or commercial access systems sometimes do. We’ll tell you honestly before any work starts whether your project needs City of Maitland approval, and we can advise on HOA submission documents as well.
Yes. We cover all of Maitland’s 32751 and 32794 ZIP codes, which span the residential neighborhoods around the lakes and the corridor along 17-92. If you’re on the edge of Maitland near Eatonville or Fern Park, call us and we’ll confirm the address on the spot.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Maitland Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Jeff Ackerman"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Daniel Novak"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Cole Mercer