Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Ocoee
Electric gate repair in Ocoee typically runs $180 – $480 for most operator, board, and sensor fixes, and it’s usually something we can get to the same week. If your gate won’t open, won’t close, or trips its breaker after a storm, call Regent Gate Repair at (855) 927-1091 and we’ll walk through the symptoms with you before we ever roll a truck. We work on gates all day, every day, in Ocoee and the surrounding West Orange County communities, and most repairs are diagnosed accurately on the first visit because we know which failure patterns show up in this ZIP code.
Ocoee’s 34761 covers everything from dense 1990s – 2010s subdivisions off Maguire Road and Ocoee-Apopka Road to the quieter acreage lots north toward Lake Apopka. That mix means we see builder-grade slide operators failing at the control board in one neighborhood and heavy custom ranch gates with rusted hinge hardware in another, sometimes in the same afternoon. Knowing the difference before we arrive changes how fast the job gets done.
Why Regent Gate Repair Is Ocoee’s Preferred Electric Gate Repair Company
Regent Gate Repair is a gate-only shop. We don’t do fences. We don’t do garage doors. We don’t split our attention across a dozen trades. Every service call is an electric gate or a mechanical gate, and that narrow focus is why our Electric Gate Repair team can name the exact failure mode on a LiftMaster, FAAC, or DoorKing operator before we ever touch the cabinet. In Ocoee, that matters because the underlying issue is often brand-specific: a Ghost Controls swing arm fails differently than a Linear slide operator, and the repair path is not interchangeable.
What we hear from Ocoee homeowners is that they’ve already had a handyman out, or a general contractor, and the gate worked for a week and then quit again. The problem wasn’t the fix. It was the diagnosis. When you call Regent Gate Repair, you get a technician whose entire skill set is built around gate systems, so the time on site goes toward the real problem instead of guesswork. We treat electric and automated gate repair as the core of the business, not an upsell.
Led by Noel Carrington, our technicians are trained across nine operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your community gate runs a commercial operator or your driveway has a residential swing arm, we speak that brand’s language. That means we can often order the right part the same day and schedule the return visit instead of making you wait while a shop figures out what board they’re even looking at.
Styles & brands we work with





Electric Gate Motor in Ocoee
Electric gate motor work in Ocoee most often lands on our board as one of two problems: the motor runs but the gate doesn’t move, or the motor has stopped responding entirely. In Ocoee’s newer subdivisions, the second pattern is more common than you’d think, because builder-grade operators were frequently installed without dedicated surge protection, and a single summer lightning strike near the Maguire Road corridor will cook a control board. A typical electric gate motor repair in Ocoee runs $190 – $380 depending on whether we’re replacing the start capacitor, rebuilding the drive assembly, or swapping a failed motor entirely. The price is quoted and agreed before any work starts, so you’re never surprised by the invoice.
Builder-Installed Operator Failures
In Ocoee’s planned communities from the 1990s through the 2010s, many homes came with a manual driveway gate and no electrical provisions at all. Homeowners later automated them, often with a solar Mighty Mule or Ghost Controls kit that bypassed the need for conduit, but those kits have their own failure cycle in Central Florida heat. We regularly replace operator arms, control boards, and battery backups on these retrofitted systems, and when the homeowner wants a hardwired upgrade, that’s where trenching enters the conversation.
Commercial-Grade Motor Service
For Ocoee HOAs and small commercial lots running FAAC, BFT, or DoorKing operators, motor service usually involves hydraulic pump units, three-phase wiring checks, and replacement of limit switches that have corroded in the humidity. We stock common parts for all nine brands we service, which speeds up turnaround for Ocoee customers who can’t leave a community entrance gate down overnight.
Gate Access Control in Ocoee
Gate access control repair in Ocoee means working on the keypad, the loop detector, the safety sensors, and the wiring that ties them all to the operator, and it typically runs $150 – $350 for a single-point failure like a dead keypad or a loop detector that won’t pick up a vehicle. In Ocoee’s HOA communities, where shared entrances run on schedule-based access codes, a lightning strike will often take out the access control wiring before it touches the operator itself. That’s why a lot of our Ocoee calls start at the control box, not the gate leaf.
Keypad and Loop Detector Repairs
When a keypad quits accepting codes after a storm, the fix is usually the keypad’s internal board or the low-voltage wiring feeding it. When a loop detector stops triggering, the saw cut in the asphalt may have widened and let the loop wire corrode. Both are specific diagnoses with specific part replacements, and we quote each repair before work begins.
Wiring Brought Up to Code
The recurring issue with Ocoee access control is wiring that was never run in conduit. We see it constantly: low-voltage cable laid bare through flower beds, zip-tied to fence rails, or buried six inches deep under turf. In Florida’s moisture and heat, that wire fails. We replace it with a properly buried conduit run so the keypad and sensors stay dry and the system survives the next storm cycle.
Trusted Brands We Service in Ocoee
We work on Ghost Controls, DoorKing, Elite, Mighty Mule, LiftMaster, FAAC, BFT, Linear, and Viking. For Ocoee customers that means we can take your call, identify the operator by the symptom description, and often have the replacement part on the truck or ordered before we arrive. We maintain local stock of common boards, remote receivers, and safety sensor kits, so turnaround for Ocoee jobs is faster than waiting on a distributor in another state. If your gate runs a brand we don’t recognize, we’ll tell you on the phone. But after years of gate-only service across Ocoee’s neighborhoods, that’s rare.
Common Electric Gate Repair Problems We See in Ocoee Homes
- Control boards fried by power surges. Ocoee’s summer lightning season is hard on gate electronics, especially in subdivisions where the operator was installed without surge protection. We replace the board and add a surge suppressor so the next storm doesn’t do the same thing.
- Sagging gates from shifting hinge posts. Fast-built Ocoee subdivisions often have gate posts set on shallow footings, and the sandy soil shifts after heavy rain. We correct the post lean, rebed the hinge, and realign the rack and pinion so the operator isn’t fighting the gate’s own weight.
- Above-ground Romex that’s failing in the sun. We recently serviced a builder-grade LiftMaster swing gate operator in the Lake Crown neighborhood that kept tripping its breaker after summer storms. Our tech found the original installer had run Romex above ground to the gate operator, which had degraded in the Florida sun. We replaced the wiring and added a properly buried conduit run, then performed sag correction on the hinge post that had shifted, and the gate has run smoothly since.
- Remote and keypad receivers losing signal. In Ocoee’s larger lots, especially the acreage properties nearer Lake Apopka, a gate receiver that once worked from the house can fail as the antenna corrodes or the receiver board degrades. We test range on site and replace the receiver or relocate the antenna rather than telling you to live with it.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Ocoee, FL
Here’s what we quote in Ocoee, in real dollar terms. A keypad or remote receiver replacement runs $120 – $220. A safety sensor swap runs $110 – $190. A control board replacement runs $180 – $380 depending on the brand. A gate motor rebuild or replacement runs $250 – $480. Full conduit trenching and rewiring for a retrofit adds $350 – $800 depending on the run length and soil conditions on your lot. No job starts without a written quote and your approval, and estimates are free. Call (855) 927-1091 and we’ll price your specific gate over the phone or with a site visit.
We Also Serve Cities Near Ocoee
Regent Gate Repair covers all of Ocoee and the surrounding West Orange County communities. We regularly run service calls to Paradise Heights, Clarcona, Orlovista, and Pine Hills, so if you’re just outside the 34761 line, you’re still in our normal coverage area. For the full picture of our local footprint, see Electric Gate Repair in Ocoee and the neighborhoods we serve.
Serving Ocoee, FL — Our Local Coverage Area
We’re based in the Ocoee area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Ocoee
Because the operator or its wiring is taking on water or the control board is shorting after a power surge. In Ocoee we most often find above-ground Romex that’s cracked and letting moisture reach the conductors, or an operator cabinet where the board got hit by a surge because no suppressor was installed. We locate the short, replace the damaged section, and add surge protection so the breaker stops tripping. Call (855) 927-1091 for a diagnosis.
Yes, and we do it regularly in Ocoee’s 1990s – 2010s subdivisions. The frequent complication is that the original build didn’t include conduit for a power run, so we trench and bury new conduit, then set the operator on a properly sized base. We quote the whole job, trenching included, before any work starts. Call (855) 927-1091 for a free measure and written price.
In most Ocoee cases, yes. The sag usually comes from a hinge post that has shifted in sandy soil or a weld that’s failing at the hinge. We correct the post lean, replace the hinge hardware, and realign the operator so the gate rides level and the motor isn’t working against gravity. If the leaf itself is rusted beyond repair, we’ll tell you straight and quote a replacement.
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your Ocoee gate runs one of those brands, we can diagnose it by symptom on the phone and usually have the part on the truck or ordered same day. We stock a range of brand-specific boards and sensors for faster local turnaround.
Yes. Any automated gate in Ocoee must have functioning safety edges, photo eyes, or both, set to protect people and vehicles. We test them on every electric gate repair visit and replace any sensor that’s out of spec. A gate that closes without a working safety edge is dangerous, and that’s not a repair we’ll skip. Call (855) 927-1091 to have yours checked.
Contact Regent Gate Repair for Electric Gate Repair in Ocoee
If your gate won’t move, trips its breaker, or the keypad quit after the last storm, call Regent Gate Repair at (855) 927-1091. We’ll ask what brand the operator is, what the gate is doing, and give you a clear plan for the repair. Estimates are free, the price is quoted and agreed before any work begins, and we do gate work all day, every day across Ocoee and West Orange County.
Written by Noel Carrington, Owner at Regent Gate Repair, serving Ocoee and the surrounding communities with dedicated electric gate repair and installation.