Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Union Park
Gate repair in Union Park usually means one of three things: an opener that won’t respond after a storm, a gate that’s sagging and dragging on the driveway, or a post that’s rotted loose in sandy soil. We fix all three, and we’re familiar with the specific ways Union Park gates fail. Call (855) 927-1091 and you’ll reach a gate specialist, not a general handyman who also patches drywall. That matters when your driveway gate won’t close and your property is exposed.
Why Regent Gate Repair Is Union Park’s Preferred Gate Repair Company
Gates are the only thing we do. No garage doors, no fencing, no side work. Every service call in Union Park is handled by a technician whose entire skill set is built around gate systems, from the control board to the hinge. That single-trade focus means we recognize failure patterns fast. When a Union Park homeowner describes a LiftMaster operator that trips after rain, we already know what we’re likely to find before we arrive.
Our Gate Repair team works on nine major operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range matters in Union Park, where we see everything from entry-level Mighty Mule systems on 1990s ranch homes to commercial-grade DoorKing operators at small plazas along East Colonial Drive. One truck, one technician, and the parts knowledge to diagnose the whole spectrum. Noel Carrington built the company around that capability, and it’s why Union Park property managers call us back when a second gate fails.
Styles & brands we work with
Wood Gate Repair in Union Park
Wood Gate Repair in Union Park typically involves replacing rotted stiles, rebuilding the lower rail, or resetting hinge post anchors that have shifted in sandy soil. Most of the wood gates we service here are attached to aluminum or steel frames, which creates a specific failure pattern: the wood moves with humidity while the frame doesn’t. The result is a gate that drags on the latch side, and a homeowner who keeps adjusting the hinges without fixing the underlying sag.
A wood gate repair in Union Park generally runs $175 – $450 depending on how much of the frame is salvageable. If the post itself is rotted below grade, you’re looking at the higher end because we’ll need to set a new post in concrete and re-hang the gate from scratch. Union Park’s rainfall and high humidity mean lower rails rot faster here than in drier parts of Florida. We always check the end grain on the bottom rail first, since that’s where water wicks up and decay starts.
Hinge and Post Replacement
Sandy soil in Union Park drains quickly after heavy rain, which sounds like a good thing until the soil washes away from around a hinge post. We see posts that look fine on top but wobble under load because the footing has been undermined. Replacing the post means digging out the old concrete, setting a new post deeper than the original, and then re-hanging the gate with fresh hinges so the reveal stays even.
If the gate itself is still structurally sound, we replace only the post and hinges. That keeps the cost down, and it’s a common repair on Union Park’s older wood gates where the pickets are still in decent shape but the post has had twenty years of Florida rain.
Gate Realignment and Latch Repair
When a wood gate won’t latch, the problem is usually a sagging frame rather than a broken latch. We realign the gate by adjusting or replacing hinges, then set the latch so it catches cleanly without needing a shoulder bump. On Union Park townhome gates with shared picket runs, we also check that the gate swings freely without binding on the neighbor’s section.
Driveway Gate Repair in Union Park
Driveway Gate Repair in Union Park often comes down to working inside a space that wasn’t designed for a gate at all. Many homes here have driveways that are shorter and tighter than what you find in Winter Park or Azalea Park, and a swing gate that needs full arc clearance simply won’t work. We regularly retrofit slide gates where a swing gate used to be, because the lot geometry leaves no other option.
Driveway gate repair in Union Park typically costs $220 – $600 for mechanical fixes like roller replacement, track realignment, or chain drive tensioning. Electric gate repair on top of that adds $150 – $350 depending on whether we’re replacing a control board, a safety sensor, or a motor. We quote the full price before any work starts, and you approve it first. There is no such thing as a surprise invoice on a Regent job.
Slide Gate Conversions for Tight Driveways
A swing gate needs room to arc across the driveway. A slide gate needs only a straight run along the fence line, which is why slide gates make sense on Union Park’s narrow lots and shared driveways. We handle the full conversion: removing the old swing gate, installing the track and rollers, mounting the operator, and wiring the safety edges so the gate reverses if it meets resistance.
The conversion usually takes a day, and we keep vehicle access working while we work. You won’t be blocked out of your own driveway while we’re on site.
Operator and Safety Sensor Repair
When a driveway gate won’t open or close on command, the operator is the first place we look. We test the control board, check power at the transformer, and listen to the motor. If it hums but won’t move, the capacitor or the gear train is the culprit. If it won’t respond at all, we check for blown fuses, tripped GFCI outlets, and water damage in the housing.
Safety photocells are another frequent call in Union Park. Florida code requires them on automated gates, and when they fail, the gate either won’t close or reverses immediately. We replace faulty sensors, clean the lenses, and verify alignment so the system passes a safety check.
Trusted Brands We Service in Union Park
We work on DoorKing, Elite, Mighty Mule in Union Park, and LiftMaster systems every week, plus five other major brands. The advantage for you is that we’re not learning a brand on your time. A Mighty Mule swing arm fails differently than a DoorKing slide operator, and we know both failure patterns from field experience, not from a manual. We also keep common parts stocked for quick turnaround, so a bad control board doesn’t leave your gate dead for a week while we wait on a distributor.
Common Gate Repair Problems We See in Union Park Homes
- Water intrusion in low-mounted control boxes. Pond-front communities along the Alafaya Trail have control boxes mounted close to ground level, and summer thunderstorms send water straight into the housing. The opener trips, and the gate stays dead until someone dries out the board and reseals the enclosure.
- Hinge post lean from sandy soil erosion. Union Park sits on fast-draining sandy soil, and after heavy rain the soil around gate posts washes away. A post that was plumb last year is now leaning three inches, and the gate drags on the ground or binds at the latch.
- Limited clearance in shared driveways. Townhome communities and properties with easements often have driveways where a swing gate can’t open fully without hitting a fence, a car, or a neighbor’s property line. Slide gate retrofits are the fix we recommend most in these situations.
- Operator stress from misaligned gates. When a gate sags, the operator has to work harder to move it. That burns out motors and strips gears early. On Union Park’s 1980s and 1990s homes, we often find operators that failed at eight or ten years because nobody addressed the underlying sag when it first appeared.
One pattern that stands out in Union Park: after summer thunderstorms, pond-front communities off Alafaya Trail see recurring opener trips. Low-mounted control boxes flood, the GFCI trips, and the whole system goes dark. It’s less common in higher-elevation Orlando subdivisions, which is why a general Orlando contractor might not catch it on the first visit. Last July, after a heavy downpour, we responded to a pond-front townhome community off Alafaya Trail where a LiftMaster slide gate operator had tripped due to water intrusion in its low-mounted control box. Our tech relocated the box above the flood line, dried and sealed the connections, and ran a full cycle test to confirm the rack and pinion moved smoothly. The gate hasn’t tripped since, even through subsequent storms.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Union Park, FL
Here’s an honest look at what gate repair costs in Union Park. A basic service call and diagnostic runs $79 – $129. Wood gate repair, including post replacement or rot repair, lands between $175 and $450. Driveway gate mechanical repair, like roller or track replacement, runs $220 – $600. Electric gate repair, which covers control boards, motors, and safety sensors, adds $150 – $350 on top of the mechanical work. If you need a full slide gate conversion because of a tight driveway, those jobs typically start around $1,800 and go up based on gate size and operator choice.
Every quote is fixed before we start, and you approve it in writing. Call (855) 927-1091 for a free estimate, and we’ll give you a number you can actually budget against.
We Also Serve Cities Near Union Park
Regent Gate Repair covers all of Gate Repair in Union Park, and we regularly work in the surrounding communities. If you’re in Winter Park, Azalea Park, Goldenrod, or Alafaya, the same gate-focused team serves your area. Same single-trade specialty, same brand coverage, same approach to quoting.
Serving Union Park, FL — Our Local Coverage Area
We’re based in the Union Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Union Park
Water is getting into the control box. Union Park’s pond-front communities have many control boxes mounted low on fence posts, and heavy rain or rising stormwater floods the enclosure, shorting the board and tripping the GFCI. The fix is to relocate the box above the flood line, dry and seal the connections, and replace any corroded terminals. Call (855) 927-1091 and we’ll diagnose it on site.
Sometimes yes, sometimes no, and we’ll tell you the truth either way. If the posts are sound and only the hinges are worn, we can repair the swing gate in place. But many Union Park driveways simply don’t have room for a swing gate to operate safely, and in those cases we recommend converting to a slide gate that runs along the fence line. We’ll measure, explain the options, and quote the conversion before any work begins.
First we find out why it’s sagging. Usually the hinge post has leaned because sandy soil washed away from the footing during heavy rain. We reset the post in a deeper concrete footing, replace the hinges, and realign the gate so it swings or slides evenly again. If the operator was stressed by the sag, we check it for damage too, since a misaligned gate shortens motor life.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers residential entry-level systems through commercial-grade operators, so we can handle a Mighty Mule on a 1990s ranch home and a DoorKing at a small commercial plaza on East Colonial Drive. For an exact diagnosis of your operator, call (855) 927-1091.
Automated gates in Florida are required to have working safety devices, including photocells and reversing edges. A non-working sensor is both a safety hazard and a code violation. We replace faulty photocells, clean the lenses, and verify alignment so the system passes a safety check. If the gate won’t close because the sensor is failed, that’s the system doing its job. Call (855) 927-1091 and we’ll get it working safely again.
Call Regent Gate Repair for Gate Service in Union Park
If your gate won’t open, won’t close, or just isn’t working like it should, call (855) 927-1091 for a free estimate. We’ll tell you what’s wrong, what it costs to fix, and how long it’ll take. No guesswork, no pressure. Just a gate specialist who knows Union Park’s homes, soil, and storm patterns.
Written by Noel Carrington, Owner at Regent Gate Repair, serving Union Park and surrounding Orange County communities.