Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Edgewood, FL | Regent Gate Repair
Ghost Controls gate repair in Edgewood usually comes down to one thing: the operator is fine, but the gate it’s bolted to isn’t. We’re Regent Gate Repair, an independent Ghost Controls service provider covering Edgewood, and we fix the whole system, not just the board. Most calls we run here involve root heave, post drift, or rust working against an otherwise healthy Ghost Controls opener. Call (855) 927-1091 for a free estimate.
Why Edgewood Residents Choose Us for Ghost Controls Service
Edgewood isn’t a city of brand-new subdivision gates. It’s largely built-out, and the Ghost Controls units we service here are typically mounted on gates that have been through years of Central Florida weather. We opened this repair shop to do one thing only: gate work. Electric gate repair, mechanical repair, and full installation. When a Ghost Controls arm starts binding mid-travel on a gate off a shaded Edgewood side street, the problem is rarely just the motor. It’s the post it’s bolted to, the hinge pins that have rusted, or a battery that’s been undercharging in canopy shade.
Noel Carrington runs our service team. He grew up off Votaw Road in South Apopka, where half the driveways he passed as a kid had a busted gate or a rusted hinge that nobody had gotten around to fixing. He picked up his foundational electrical and mechanical skills at Seminole State College in Sanford, then spent the better part of two decades narrowing his focus entirely to automated gate systems: swing arms, slide operators, access control boards, the works. We work on Ghost Controls solar and low-voltage DC operators every week, from the DIY-installed single-swing kits to larger slide and dual-gate setups. We are an independent repair shop and are not authorized, sponsored, or endorsed by Ghost Controls. We stock OEM-spec boards, arms, batteries, and brackets, plus the stainless hardware Ghost Controls owners in Edgewood actually need to fight the humidity, and we offer Ghost Controls service in Pine Castle as well.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Edgewood
- Gate reversing or faulting after a storm, but the board is fine. Limb strikes and root heave on wooded Edgewood lots push gate frames out of plumb. The Ghost Controls arm then binds mid-travel and the controller reverses or throws a fault. We realign the gate and reset the limits rather than selling a board you don’t need.
- Operator stalls on a rusted pivot after summer rains. Year-round humidity in Central Florida corrodes the operator’s hinge pins, brackets, and battery contacts. A unit that ran clean in dry spring will stall on a rusted pivot after summer storms. We replace corroded pins with stainless and seal the connectors properly.
- Solar unit quits in the afternoon or refuses to open on cloudy days. Solar and low-voltage DC Ghost Controls units on shaded Edgewood driveways go into undervoltage after extended canopy shade and heavy storm clouds. The operator stops short or won’t engage. Often it’s a battery that needs replacement, not a controller fault.
- Limit switches no longer match the gate’s actual travel. Sandy, high-water-table soil shifts the posts the operator is bolted to. Arm alignment drifts, so the Ghost Controls limit switches think the gate is somewhere it isn’t. We re-set posts and re-sync limits in the same visit.
- Hinge and bracket corrosion that makes the operator work harder than it should. We see this constantly on the 1970s-90s lots in Edgewood. Rust on the hinge side makes the Ghost Controls opener fight friction on every open and close cycle. We install quality aftermarket hardware: stainless pins, sealed connectors, marine-grade fasteners.
Ghost Controls Service in Edgewood: What Local Conditions Mean for Your Equipment
Edgewood is different from cities where new gates go up on clean, open lots. Here, many properties sit under mature oak and pine canopy on sandy, high-water-table soil. The typical Ghost Controls call in Edgewood isn’t a new install; it’s a repair on a gate bolted to an original or once-replaced post on an older wooded lot. Root heave and post drift are what defeat the operator, not traffic volume. A driveway gate on a wooded interior lot off Orange Avenue faces a completely different load profile than one on an open lawn in a newer development, unlike the conditions where we provide Ghost Controls service in Holden Heights. The pine limbs come down in summer storms, the roots push up from below, and the post the Ghost Controls arm is bolted to moves a half inch. That’s all it takes to throw arm geometry off and make the controller fault. We don’t just swap the board and leave; that’s a temporary fix. We diagnose the post, the alignment, and the hinge wear, because that’s what actually failed.
Ghost Controls Models & Products We Service in Edgewood
We work on the full Ghost Controls lineup that shows up on Edgewood driveway gates. That includes the Heavy-Duty Single Swing series with solar or AC transformer, the dual-swing automatic gate opener kit, the slide gate opener kit for tube and ornamental slide gates, and the accessory ecosystem: AXTB external batteries, keypads, remotes, and intercom integration. Our parts approach is straightforward. We use Ghost Controls-compatible OEM-spec boards, arms, batteries, and brackets where the unit is healthy enough to be worth it, just as we do for Ghost Controls service in Conway. On corrosion-prone joints, we use quality aftermarket hardware: stainless pins, sealed connectors, marine-grade fasteners. If a board or arm has failed alongside a bent frame or leaning post, we tell you honestly that the operator isn’t the whole problem. Realignment and post work have to come first.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Edgewood
Most Ghost Controls repair work in Edgewood falls into predictable ranges. Service call and diagnostic runs $75-$120. Gate realignment for a single-swing opener typically lands between $150 and $250. Hinge replacement runs $120-$220 depending on metal condition and access. Battery replacement for solar or low-voltage DC units is $80-$180. Control board replacement, when it’s genuinely the board, is $200-$375. Post re-setting and re-plumbing starts around $200 and goes up depending on soil and concrete work. The price is quoted and agreed before any work starts, so there’s no surprise invoice at the end. Call (855) 927-1091 for a free estimate, and we’ll walk through what your Ghost Controls system actually needs.
Serving Edgewood, FL — Our Local Coverage Area
We’re based in the Edgewood area and know this community well, and we also provide Belle Isle Ghost Controls service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Edgewood
Because the gate frame got knocked out of plumb by a falling limb or shifted when the sandy soil gave way under a post. The Ghost Controls arm binds mid-travel, the controller senses resistance, and it reverses or faults. The board is usually fine. We re-plumb the post, realign the gate, and reset the limit switches. Call (855) 927-1091 to schedule a visit.
Almost never. Edgewood lots with mature oak and pine canopy shade the solar panel through the afternoon, so the battery stops receiving enough charge. The operator goes into undervoltage and stops short or refuses to open. We test the battery first, check panel placement, and replace the battery if it’s no longer holding charge. It’s a much cheaper fix than a controller or motor replacement, so it’s worth a diagnostic call first: (855) 927-1091.
Yes. Most Ghost Controls single-swing and slide kits in Edgewood were owner-installed. The common issues we see on DIY installs are arm geometry slightly off, limits not synced, or wiring connections that weren’t sealed against Central Florida humidity. We don’t re-do the whole install unless it’s genuinely wrong; we correct the specific points that are causing the fault. Tell me the model number and I can usually tell you the problem before I pull in the driveway.
They actually do. Sandy, high-water-table soil settles and shifts under gate posts. When the post the Ghost Controls arm is bolted to drifts even a half inch, the arm geometry changes and the limit switches no longer match the gate’s actual travel. We see this on older Edgewood lots with original posts constantly. It’s not a pitch; it’s physics.
No. Hinge pins, brackets, and battery contacts corrode in Central Florida humidity, but the operator rarely needs full replacement for that alone. We pull the corroded pins, install stainless replacements, seal the connectors, and the same Ghost Controls board and arm keep running. A full operator replacement only makes sense when the board or motor itself has failed. Call (855) 927-1091 and we’ll tell you which one you’re dealing with.
Service Areas Near Edgewood
We cover Edgewood and the surrounding south-Orlando corridor. If you’re outside Edgewood proper, we also run Ghost Controls service in Ocoee, Astatula, and neighboring communities. Our Ghost Controls sales & service page covers the full brand scope, and our Edgewood service area page has more detail on coverage. For service in nearby cities, see Ghost Controls service in Ocoee or Ghost Controls service in Astatula.
Book Your Ghost Controls Service in Edgewood Today
If your Ghost Controls opener is reversing, stalling, or throwing faults, call us at (855) 927-1091. We’ll schedule a diagnostic, give you a clear price before any work starts, and get your gate moving again. Same-day availability in Edgewood when our truck’s nearby.
Written by Noel Carrington, Owner at Regent Gate Repair, serving Edgewood and the south-Orlando corridor.