Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Edgewood, FL
Gate installation in Edgewood usually involves replacing or adding a driveway gate on an older lot where posts have shifted in sandy soil, or on a newer infill home that never had one. We’re Regent Gate Repair, and gates are the only thing we do. From a simple estate-style swing gate to a full automatic slide system, we handle the site work, the operator, and the electrical from the control board to the hinge. Call (855) 927-1091 for a free estimate on a new gate in Edgewood.
Why Edgewood Homes Are Different
Edgewood is a small, built-out suburb on Orlando’s south side, and the gate work here follows a pattern we see across the whole corridor. The lots are older, the trees are bigger, and the soil is sandier than what you find in newer subdivisions to the west. That combination creates specific problems.
First, the housing stock. Edgewood is mostly mid-century and 1970s-to-90s single-family homes, plus a wave of newer infill construction. Many of the older properties still have their original gate posts, or replacements that were set without much thought for drainage. The sandy, high-water-table soil here doesn’t hold posts the way clay does. Posts shift, gates sag, and latch alignment drifts a little more every season.
Second, the canopy. A lot of Edgewood sits under mature oaks and pines. That’s part of what makes the neighborhood feel established, but it also means fallen limbs, root heave, and pine-needle debris around gate tracks and hinges. After a summer storm, we regularly see gates that won’t close because a root has pushed a post an inch out of line, or a limb has knocked a swing gate off its arc.
Third, the humidity. Central Florida’s humid subtropical climate means year-round rust and corrosion pressure on hinges, latches, bolts, and operator housings. A gate that looks fine in January can be binding by August. When we install in Edgewood, we account for all of this at the quoting stage, not after the concrete is poured.
Styles & brands we work with
Our Main Edgewood Services
Most calls we take in Edgewood start as one of two problems: a gate that no longer works the way it should, or one that has stopped working entirely. Both have dedicated Edgewood pages, because the work and the pricing are different enough to warrant separate detail.
Gate Repair in Edgewood
Mechanical gate repair covers everything that isn’t the motor: hinges, posts, latches, wheels, rollers, and the structural alignment of the gate itself. In Edgewood, the common culprits are root heave, storm-driven limb strikes, and rusted hardware on older installations. We straighten posts, re-hang gate leaves, replace worn hinges and rollers, and adjust latch geometry so the gate closes cleanly. This is the service for a gate that drags, binds, won’t latch, or has dropped on one side. See Gate Repair in Edgewood for the full breakdown.
Electric Gate Repair in Edgewood
Electric gate repair is our core specialty. When the operator hums but doesn’t move, the remote stopped working, the gate reverses on its own, or the keypad is dead, the fault is usually in the control board, the safety sensors, the loop detector, or the wiring between them. We work on LiftMaster, FAAC, BFT, Linear, and other major brands, and our technicians diagnose brand-specific failure patterns rather than treating every gate as a mystery. See Electric Gate Repair in Edgewood for costs, symptoms, and what happens on a typical service call.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Edgewood
Gate installation in Edgewood usually means one of two things: replacing a gate that has outlived its posts, its operator, or both, or adding a gate to a property that never had one. The older lots in Edgewood often have metal tube gates from the 1980s or 90s with posts that have drifted in the sandy soil and hardware that has rusted through several humid seasons. Newer infill homes sometimes have privacy fencing but no driveway gate, and the owners want something that closes off the street side without making the property feel like a compound. Whatever the starting point, we plan the installation around Edgewood’s terrain: post depth and concrete mass matter here more than in the open subdivisions, because the soil doesn’t grip posts the way dense clay does. We also account for what’s overhead, since a limb over your driveway will eventually meet a swing or slide gate. One call handles the full job, from removing the old gate to programming the new operator. Gate Installation is the service hub for anything new, and the details below cover what Edgewood homeowners need to know.
Driveway Gate Installation
Signs you need it
Your existing gate binds on one side, the posts lean visibly in or out, or you want a gate on a driveway that has never had one.
What it costs in Edgewood
A driveway gate installation in Edgewood typically runs from $1,800 to $5,400 for a single swing gate with new posts and hardware, and from $4,200 to $9,900 when an automatic operator and keypad are added.
How we do it
We set new posts at proper depth with adequate concrete mass, hang the gate to swing true, then mount and program the operator if the job includes automation.
Automatic Gate Installation
Signs you need it
You already have a gate that works fine mechanically, but you’re opening and closing it by hand and want remote, keypad, or phone access.
What it costs in Edgewood
Adding an automatic operator to an existing gate in Edgewood typically costs $1,250 to $3,700 for the opener, receiver, and safety sensors, with keypad and loop detection adding $340 to $1,000.
How we do it
We mount the operator, run the control wiring, set the open and close limits, configure the remotes and keypad, and verify the safety sensors and auto-reverse function before we leave.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your setback is too short for a gate that swings into the property, and you need a gate that tracks sideways instead.
What it costs in Edgewood
Sliding gate installation in Edgewood typically runs $4,500 to $13,000 depending on gate width, track type, and operator class, with a basic single-panel slide on concrete track starting around the low end.
How we do it
We pour or verify the track base, set the rail or V-track, hang the gate panel, then install and program the slide operator with its safety edges and photo eyes.
What Gate Installation Costs in Edgewood
| Item | Typical range in Edgewood |
|---|---|
| New posts set with concrete | $400 – $900 |
| Single swing gate, hardware | $1,800 – $5,400 |
| Automatic operator added | $1,250 – $3,700 |
What pushes a quote up in Edgewood is usually soil and tree work: extra concrete around posts because the base is sandy, additional clearing for a slide track, or relocating the gate line away from a root zone. Every quote is agreed in writing before any work starts, so the number we give you is the number on the invoice.
Will an automatic gate add value to an Edgewood home?
Yes, on most Edgewood lots it adds privacy and street-level security, and buyers in the Orlando market consistently prefer gated driveways when comparing homes of similar age. The return is strongest when the gate is automated and the posts are set correctly for the soil.
Do I need an HOA approval for a new gate in Edgewood?
Some Edgewood properties fall under HOA or deed restrictions that govern gate height, style, and placement. We recommend confirming with your association before installation, and we can provide the spec sheet they’ll want to see. Call (855) 927-1091 to talk through your lot.
Brands We Service in Edgewood
Our bench carries control boards, safety sensors, remotes, and replacement arms for LiftMaster, FAAC, BFT, and Linear, among others. Having the common failure parts on the truck means most Edgewood service calls finish the same day rather than waiting on a shipment. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Edgewood, FL
| Service | Typical range in Edgewood |
|---|---|
| LiftMaster gate repair | $180 – $420 |
| FAAC gate repair | $220 – $500 |
| BFT gate repair | $220 – $480 |
| Linear gate repair | $180 – $410 |
| Viking gate repair | $240 – $550 |
| New gate posts set with concrete | $400 – $900 |
| Single swing gate, hardware | $1,800 – $5,400 |
| Automatic operator added | $1,250 – $3,700 |
Prices in Edgewood skew toward the upper end of these ranges when a job requires extra concrete mass in sandy soil, limb or root clearing around the gate line, or replacement of rusted hardware that hasn’t been touched since the 1980s. You get the full price before we start, and we do not begin work until you approve that number.
Neighborhoods We Serve in Edgewood
We cover all of Edgewood’s 32890 ZIP code, from the older blocks near Lake Jessamine to the infill homes along the neighborhood’s east side. Response times vary by time of year and how full the schedule is, but most Edgewood calls can be scheduled within a few business days, and repair work often lands sooner than installation because parts are already on the truck.
- Lake Jessamine area
- Edgewood Ranch
- Forest Park
- Hansel Avenue corridor
- Newer infill lots along the town’s north end
Service Area – Cities Near Edgewood
Our Edgewood team also covers the surrounding south-Orlando communities for gate repair, electric gate work, and new installations. We’re on familiar terms with the gate styles and soil conditions in Belle Isle, FL, Pine Castle, FL, Holden Heights, FL, and Conway, FL. If your gate sits in one of those areas, the same local crew handles it.
Serving Edgewood, FL — Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Edgewood
Most Edgewood repair calls are scheduled within a few business days, and because our trucks carry common control boards, sensors, and hardware, many visits finish in one trip. Installation work is quoted first, then scheduled around material and concrete curing.
Edgewood follows Orange County building requirements for gate posts, setbacks, and automatic gate safety. We handle the installation to code, including safety edges and photo sensors on automated gates, and we can point you to the right local office if your project needs a permit.
Yes. We regularly work on single-family gates inside Edgewood HOA communities and on shared access control gates where the association manages the common entry. On commercial-grade operators like FAAC and BFT, we carry the diagnostic tools and board-level knowledge those systems require. Call (855) 927-1091 to schedule a look.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Edgewood Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Daniel Novak"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Cole Mercer"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Roger Barrett