Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Conway, FL
Gate installation in Conway usually means replacing a rusted or wind-damaged driveway gate on a 1960s to 1980s lot, or adding a motorized opener to an older manual gate that’s finally become too heavy to swing by hand. Most homes here in the 32812 ZIP sit on generous fenced lots with pools and detached garages, so the work tends to involve ornamental aluminum and steel barrier gates rather than anything agricultural. We handle the full replacement or new install from the post to the control board. Call (855) 927-1091 for a free estimate on a gate that matches your Conway home.
Why Conway Homes Are Different
The housing stock in Conway shapes nearly every gate job we take here. These are established mid-century to 1980s single-family homes on wide lots, many with pools, detached garages, and side yards that were fenced decades ago. The original gate hardware is often still in place, and decades of Central Florida humidity have done exactly what you’d expect: fasteners have pitted, hinge pins have seized, and posts set in soil that heaves with every rainy season have drifted out of square. We’re not usually installing gates on fresh concrete pads here. We’re working around settled posts, mature tree roots, and existing fence lines that have to stay intact.
Then there’s the lake effect. Conway sits against the Conway Chain of Lakes, and homes within a few blocks of the water get a steady dose of humid, salt-laden air that accelerates corrosion on gate hardware and operator boards. We see pool-enclosure gates and side-yard gates where stainless fasteners have started to pit within two or three seasons. Add hurricane-season wind gusts to lightweight aluminum gates that were never rated for that kind of loading, and you get bent stiles, torn hinge brackets, and operators that burn out fighting a gate that no longer swings true. This isn’t generic Florida gate work. Conway’s combination of older lots and lake-adjacent air changes which parts fail and how fast.
Styles & brands we work with
Our Main Conway Services
Conway homeowners call us most often for two things: a gate that has mechanically failed, and a gate whose electric opener or control board has stopped responding. Both get their own dedicated pages below.
Gate Repair in Conway
Repair work in Conway is mostly about corrosion and wind damage. Hinges seize, posts lean, and aluminum gates pick up bends from storm winds that push them past their stops. We repair the mechanical side of the system: hinges, posts, latch hardware, gate alignment, and structural straightening. A repaint won’t fix a gate whose hinge pin has fused, and we see that a lot within a few blocks of the lakes. If your gate drags, sags, or won’t latch, the fix usually starts with a careful look at the hardware rather than a whole new gate. Read the full breakdown on our Gate Repair in Conway page.
Electric Gate Repair in Conway
Electric gate failures in Conway follow a very predictable pattern. Summer thunderstorms dump rain and drive humidity into operator housings, which shorts control boards and corrodes wiring terminals. Wind-bent gates force motors to work against binding resistance until they overheat or strip. We work on LiftMaster, FAAC, Mighty Mule, Elite, and the rest of our brand lineup, diagnosing from the control board to the motor to the safety sensors. When an automated gate won’t open, won’t close, or reverses for no reason, it’s rarely a mystery; it’s usually one of those failure patterns. See the specifics on our Electric Gate Repair in Conway page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Conway
Gate installation in Conway means working around what’s already there: settled posts, mature trees, existing fence lines, and hardware that’s been fighting the lake air for thirty years. Most homeowners in the 32812 area either need a damaged gate replaced outright, or they want a new automated driveway gate on an older property that never had one. The climate here punishes lightweight aluminum, so part of every install is choosing materials and hardware that will hold up to hurricane-season wind and subtropical humidity. It’s the same Gate Installation process whether we’re replacing a bent pool-enclosure gate or building a motorized driveway entry from scratch.
Automatic Gate Installation
Signs you need it
You’re still getting out of the car to open and close a heavy gate by hand, or the gate is too wide and heavy for a simple manual swing without dragging.
What it costs in Conway
Automatic gate installation in Conway typically runs $4,800 – $14,500 depending on gate width, operator type, and whether we’re adding access control.
How we do it
We set or reinforce the posts, mount the gate to swing or slide freely, then install the operator, control board, safety sensors, and any keypad or intercom.
Driveway Gate Installation
Signs you need it
The existing driveway gate is rusted through at the stiles, bent from a storm, or no longer swings without scraping the drive.
What it costs in Conway
A new driveway gate install in Conway commonly lands between $7,400 and $15,500, with motorized systems running higher than manual ones.
How we do it
We pull measurements, check post plumb and footing depth, then build or mount the gate and align hinges so it swings clean for years, not months.
What Gate Installation Costs in Conway
| Item | Typical range in Conway |
|---|---|
| Manual driveway gate replacement | $1,950 – $5,800 |
| Automatic gate system (gate + operator) | $4,800 – $14,500 |
| Ornamental aluminum driveway gate | $7,400 – $15,500 |
How long does a gate installation take in Conway?
Most driveway gate installs in Conway wrap up in one to two days. Add a half day more if we’re running conduit for a new operator or setting posts in soil that’s still saturated from heavy rain.
Will my Conway HOA need to approve a new gate?
Many Conway neighborhoods with lake access or older deed restrictions require architectural review before a new driveway gate goes in. We provide the specs and materials list your HOA will ask for.
Brands We Service in Conway
Regent Gate Repair works on nine gate-operator brands, and in Conway we see a lot of Mighty Mule and Ghost Controls on residential gates, with FAAC and LiftMaster on the heavier driveways. Because gates are the only thing we do, we keep common boards, sensors, and hardware stocked locally, which keeps most repairs from dragging into a parts-order delay. Check the full lineup on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Conway, FL
| Service | Typical range in Conway |
|---|---|
| Gate hinge repair or replacement | $195 – $480 |
| Gate post straightening or reset | $550 – $1,400 |
| Gate sagging or alignment repair | $250 – $600 |
| Gate latch or lock replacement | $150 – $390 |
| Electric gate operator replacement | $950 – $2,800 |
| Control board repair or replacement | $450 – $1,400 |
| Loop detector installation or repair | $480 – $1,300 |
| Manual driveway gate replacement | $1,950 – $5,800 |
| Automatic gate system (gate + operator) | $4,800 – $14,500 |
| Slide gate conversion | $3,600 – $9,800 |
What pushes a Conway gate job toward the high end is usually lake-adjacent corrosion: posts that need full resetting, hardware that’s pitted beyond salvage, and operators that have been running against a binding gate. Whatever the number is, you’ll see it in writing before we touch anything, and the price is agreed before any work starts.
Neighborhoods We Serve in Conway
We work throughout the 32812 ZIP, from the lakefront streets around Lake Conway down to the neighborhoods tucked under the MCO flight paths. Response for most gate repairs in Conway runs same-day or next-day depending on the season and part availability.
- Conway Acres
- Lake Conway Park
- Conway Hills
- Mariners Village
- Dixie Terrace
Service Area – Cities Near Conway
Beyond Conway’s 32812 ZIP, we cover nearby central Florida communities with the same gate-only focus. That includes Orlando, FL to the north, Azalea Park, FL, Belle Isle, FL along the southern lake chain, and Edgewood, FL to the west. Homeowners and property managers in any of these cities can reach us at (855) 927-1091.
Serving Conway, FL — Our Local Coverage Area
We’re based in the Conway area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Conway
Most gate repair calls in Conway are dispatched same-day or next morning. Repairs that need a specific brand board or operator part can take an extra day or two depending on part availability. Installation is scheduled, not rushed; we’ll give you a set date and time.
We handle the gate itself, and we’ll provide the measurements, drawings, and material specs if your Conway HOA or Orange County asks for documentation. Any permit filings for the structural work stay simple because we provide exactly what the reviewer needs the first time.
Yes, we cover the full Conway 32812 area, from the east side of Lake Conway over to the neighborhoods that sit under the MCO approach paths. Same crew, same gate-only specialty, whichever end of Conway you’re on.
If your Conway gate is sagging, seized, wind-bent, or just dead at the keypad, call Regent Gate Repair at (855) 927-1091. We’ll give you a straight answer and a free estimate before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Conway Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Roger Barrett"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Diego Mendoza"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Anika Patel